Dome Light

[-Alero-]

can someone tell me how to remove the dome light safely so i can replace the bulbs, and what are the blub #'s for all 3 of the bulbs, i belive i heard a 512 or a 216 but im not possitive. any advice will help thanks :thumbsup:

[smokinAMD]

Just pull it down. If the friction clips crap out, which is likely. You can just get a small self tapping screw and screw the dome light assembly back into cross member it mounts on.

[-Alero-]

so basically i have to break it to take it out and replace the bulbs?

[FormulaNERD]

no, you dont have to break it, but if it's been pulled more than a few times the little clips will start to break, and it'll be less secure up there unless you screw it in like brent said.

[Vtolds]

Stick a thin tip slotted screw driver in one side of the cover where the small slotted hole is and then pull the cover off.

[alerosport.com]

move it from side to side and the clips should release it. but they will break over time if removed allot or forcefully.

[|Rev|]

what are the bulb numbers?

Also, kind of off topic, but what are the bulb numbers on the map reader lights on the rear view mirror?

[turtles_ride]

i took a picture of mine when i redid my roof. I forced it off the first time i took it down and the clips had been weak ever since. if it happens to you i put a picture in this thread about where you can safely put a screw to hold it up. Its about half way down the first page
http://invision.aleromod.com/index.php?showtopic=5274

[FormulaNERD]

Originally posted by |Rev|@Sep 19 2004, 07:13 PM
what are the bulb numbers on the map reader lights on the rear view mirror?
194