Custom Exhaust-Single or Dual Super 44s?

[Garnetdawn]

I've been thinking about it and I don't know if I want go with a Cat-back with a Single Flowmaster Super 44 or Cat-Back with Dual Super 44s...does anyone know that if I go with the duals if it will be louder then just single and rather or not it will crackle horribly?

[sleepyalero]

Redog has dual 40 or 44s on his alero. Doesnt sound to bad. Pretty loud I would say.

[sleepyalero]

Heres a vid of his car

http://m.youtube.com/watch?v=5n5QqNYpxS4

[Garnetdawn]

Sounds pretty damn good, Im also planing on having a Highflow cat installed too while im at it Think I might go with the Duals...glad he gets good mileage i average about 15...doesn't help I drive fast and its running rich due to the CAI

[sleepyalero]

Shouldnt be running rich cause of the intake... mine didnt.

[Shiwnath]

Shouldnt be running rich cause of the intake... mine didnt.

This. Our cars are able to compensate for the increased air flow that something as minor as a cold air intake adds. If you're running rich then it's got to be something else.

[Garnetdawn]

When Iinstalled it and as I was driving the Service vehicle light comes on (NOT the check engine light) the ABS light comes on and the Trac off comes on

[sleepyalero]

Thats a wheel bearing.

[Shiwnath]

When Iinstalled it and as I was driving the Service vehicle light comes on (NOT the check engine light) the ABS light comes on and the Trac off comes on

That's the wheel bearing's speed sensor malfunctioning most likely. Although when I changed mine for the exact same problem, it was the wheel bearing sensor plug on the car not properly making a consistant connection with the plug on the wheel bearing. If I kept shaking the wire, the "low trac" light would turn on when my car was not moving lol.

[Garnetdawn]

Ill have the Shop check the sensors since its their now getting a new water pump and head gaskets and the heads milled.

[Shiwnath]

Ill have the Shop check the sensors since its their now getting a new water pump and head gaskets and the heads milled.

Damn, you should have swapped on the 3500 heads + Lower intake manifold while the heads were off. There would have been noticeable difference in performance.

[Garnetdawn]

Well I would but im not paying for the repairs and I have to pay back for the cost

[S8track16]

Those lights came on my car after installing my wai, I didn't have to IAT sensor connected properly.

[Papa Rad17]

Those lights came on my car after installing my wai, I didn't have to IAT sensor connected properly.

Ive done that one before!:lol: redogs super 44s sound good. I had a flowmaster 40 series on mine back in the day as well, perfect sound for it if you ask me.

[Redog]

2 Flowmaster Super 44's

Look up "Redog out of hiding" thread. It's old. There is a pic of how the mufflers are in place.

Plus I avg 35 MPG on the highway and I run a tad rich.

How do you know you are running rich? Do you have a WB A/F ratio gauge?

[Nas Escobar]

I've been thinking about it and I don't know if I want go with a Cat-back with a Single Flowmaster Super 44 or Cat-Back with Dual Super 44s...does anyone know that if I go with the duals if it will be louder then just single and rather or not it will crackle horribly?

Everyone gave you an answer, yet no one bothered to ask if you had the 4 or the 6 cylinder. Redog has the 6, so keep that in mind. I'm not sure what year car or anything that you have but the Ecotec will be harder to get it to sound muscular unlike the 3400. This from a former Eco owner.

[03glgold]

Everyone gave you an answer, yet no one bothered to ask if you had the 4 or the 6 cylinder. Redog has the 6, so keep that in mind. I'm not sure what year car or anything that you have but the Ecotec will be harder to get it to sound muscular unlike the 3400. This from a former Eco owner.

It's 3400 he started a problem thread either the day or day before for his car in the 3400 section and some of those commenting went from one to the next so they already knew from there, but I agree with the eco sound thing which is part of the reason I haven't done exhaust.

[Shiwnath]

Everyone gave you an answer, yet no one bothered to ask if you had the 4 or the 6 cylinder. Redog has the 6, so keep that in mind. I'm not sure what year car or anything that you have but the Ecotec will be harder to get it to sound muscular unlike the 3400. This from a former Eco owner.

Also he mentioned cylinder heads as a plural. So that's what gave it away to me.

[Garnetdawn]

Yes its a 3400 and I know i'm running rich cause I used a code reader and its reading running rich or I just have a retarded ass MAS. Yes I have reset the computer by unhooking the battery and also driving 35 miles at 55 MPH

[Garnetdawn]

Those lights came on my car after installing my wai, I didn't have to IAT sensor connected properly.
I'll have to check that once my cars back form the shop either tomorrow or Thursday.

[Nas Escobar]

It's 3400 he started a problem thread either the day or day before for his car in the 3400 section and some of those commenting went from one to the next so they already knew from there, but I agree with the eco sound thing which is part of the reason I haven't done exhaust.

I rest my case then. Haven't been on here in a while and saw this... I didn't want the guy to slap on something on the Eco. I think the only thing that could sound good on an eco is a Flowmaster with 4-2-1 headers. The thing is I think only the ebay Tsudo ones are available for it.

[Garnetdawn]

I rest my case then. Haven't been on here in a while and saw this... I didn't want the guy to slap on something on the Eco. I think the only thing that could sound good on an eco is a Flowmaster with 4-2-1 headers. The thing is I think only the ebay Tsudo ones are available for it.
Na if i had a Eco id probably go with a Thrush or maybe just maybe a N1

[MMGT1]

Had SLP muffler from 2002 Firehawk on my 3400, always liked it

[Garnetdawn]

Just got her from the shop and shes back to whistling again :scpimp:

[tacollins]

I know I'm running a little behind but that light can also be caused by the wheel hub assembly going bad, my mechanic said and I quote "This is a problem... You see it's a wonder if you hadn't ran off and left your front wheels..." It's a pretty bad thing also he ended up having to replace both sides because they were both very loose. Just throwing this in there in case someone runs a search for the warning lights...