euro headlight switch

[tw0123]

I tried a quick search and could not find anything about these... anyone know a part number or have any information about this switch? I bought a set of these lights and would love to be able to adjust them while driving!!

http://ipocars.com/imgs/a/b/h/s/h/chevrolet__alero_2003_9_lgw.jpg

it's the set of switches under the gauge cluster by the steering wheel...
thanks for any help! :) :canada:

[cavedewler]

did your euros come with the motor to level them? I haven't checked mine since I bought them

[tw0123]

http://i.ebayimg.com/00/s/MjA2WDUwMA==/z/UR4AAOxypeRR6ALd/$(KGrHqZHJFcFG+-Yjl59BR6!Lc)zWQ~~60_12.JPG

if you look right between the low beam and high beam, this connector is where they would attach to the switch inside the car...

basically, I would be looking to first find the interior switch, then the actual headlight connection, and then I could just run the wires to make it work...

[sleepyalero]

Ask falloutboy to go search for an alero at the junkyard and pull it out for you.

[a.graham52]

Somewhere on here there is a thread about euro lights on eBay going wicked cheap. I tried looking but can't find it. That should have more info on the subject. I KNOW it's out there somewhere

[sleepyalero]

The headlights yes... they are like 130 for the set. But he wants the headlight switch that aims them from a button. That is not as easy to find.

[tw0123]

The guy started selling them for $65/set i think... now he's up to $130 lol... i have emailed him asking about what I'm looking for with no reply yet... i was hoping one of the guru's might have a part number before i asked falloutboy or another European member...

[a.graham52]

I'm just saying there may be more info buried in that thread because it was brought up. I remember looking for the wiring schematics .

[fisdad]

I'm just saying there may be more info buried in that thread because it was brought up. I remember looking for the wiring schematics .

Nothing ever came of it. I started that thread. I bought my weirdo lights for $65 and posted a link. Now everybody has them.

I've looked and asked. Nobody ever got back to me. You need the switch, the under dash console plate to mount the switch and the wiring harness. Best lead I could find was a European Chevy dealer who needed a vin number I didn't have.

[falloutboy]

IIRC its a Saab Switch (for the fog lights and aiming adjuster).

If I can pry my switch and aiming wheel out of the dash, I'll post some pics and numbers. But yes, sleepy is right, next time write me a PM, so I don't miss out on these kind of threads.

[mfuller]

Good luck finding this stuff anywhere but a salvage yard.
Most interior pieces aren't available anymore.

[falloutboy]

I looked around a bit, and here are the part numbers
http://parts.nalleygmc.com/images/parts/gm/fullsize/0608023N10-039.JPG

032 SWITCH. Headlamp/Fog Lamp/Turn Signal
SWITCH,RR FOG LP. Required: 01
For: NK,NL MAN HDLP CONT SYS(TR6)(EXPORT),RR FOG LP(T79) - 22640691 - $25.18

033 PLATE. Instrument Panel Trim
PLATE,I/P SW TR(GRAY). Required: 01
For: NK,NL MAN HDLP CONT SYS(TR6)(EXPORT),RR FOG LP(T79),INTERIOR TRIM COLOR(92I) - 22616417 - $30.53
TR(NEUTRAL). - 521 - 22616415 - $27.91
SW TR(OAK) - 671 - 22616416 - $12.05

034 SWITCH. Capsule/Headlamp Adjuster
SWITCH,HDLP LVLG ACTR. Required: 01
For: NK,NL MAN HDLP CONT SYS(TR6)(EXPORT),RR FOG LP(T79) - 22607024 - $78.21

[jawa]

i want 034

[cavedewler]

me too :O

[tw0123]

That's what I'd be looking for as well... but you'd have to get all 3 to look proper...

[falloutboy]

now only to get the rear fog lights for u americans :D

[cavedewler]

rear fog lights??

[fisdad]

rear fog lights??

Lol yes.. Rear fog lights. Noob :p

[Nas Escobar]

rear fog lights??

Europe requires (among other things) rear fog lights. Think of the bumper lights on the Aurora that were about as bright as the normal brake lights when the brake is pressed.

[tw0123]

yupp... if I remember right, the driver side inner trunk tail is illuminated as the rear fog lights on our cars...

I might give those part numbers from that picture to my mechanic and see what he comes up with over here... he works for a GM dealer, so I might get lucky!!