Image-Dynamics-CTX-46

[negolien]

I assume these won't fit in the doors right? lol just checking to make sure.


http://www.sonicelectronix.com/item_22332_Image-Dynamics-CTX-46.html

[sleepyalero]

No.

[negolien]

Too bad all the good stuff don't fit... figures :<). Guess I'll keep the 4x6's in doors, Comps in Q-logic kicker plans going. Got all my all wire coming Monday including the big three. Installing the big three myself of course. The 0 gauge audio stuff is being done next Saturday. Then the component parts like speakers boxes all that crap will start. Yeah finally gonna clear out some space in my closet lol.

[smccarthy1883]

I have my car listed with them and it says it does fit. They could be wrong. Not like that's never happened before.

[smccarthy1883]

I jammed some infinity 5 and a quarters in my door using the stock bracket for now. Just used some longer screws and drilled right into em. Don't have em amped just yet, but they throw 255 watts peak and I think it was 140 rms.

[sleepyalero]

Well the front doors are round .

[negolien]

Yeah I seen a few posts like that. Just gonna jam the Polk DB461's in there and use some Q-Logics for some Kappa 60.11cs's. Keeping my eyes and ears our for other speaker and upgrade options though just to be aware of what may fit for the future.

[smccarthy1883]

They are round, but the magnets would have interfered with rhe window If I remember right.

[S8track16]

Pretty much any speaker will fit in the door, depending on how much custom work you want to do.

[JonStoltz]

Pretty much any speaker will fit in the door, depending on how much custom work you want to do.

That's the spirit!! Ha would you recommend enclosures for my 6x9's with some 'fil

[JonStoltz]

Neg, did u get those kick panels in your car? Ones you PM'd me about

[Babyblue]

Get some Polkaudio DB461 4"X6". That's what I have and they sound great!

[negolien]

Get some Polkaudio DB461 4"X6". That's what I have and they sound great!

That's what I have planned for install. They and the Kappa 693.11i's are in the closet waiting for install. I have not gotten the Kappa 60.9cs or the kick panels from Q-logic though. Install is starting this coming Sat with the new 0 gauge cables, distro blocks and big 3. Then will go the Kappas, polks and the Kenwood Excelon x400/4. I will use that to power the Kappa's and Polk DB461s.

Once I get that all done and set right I'll start thinking about If I really want to add the Kick panel or just stick with the 4x6's and 6x9's and the subs. Eventually going to upgrade the subs and sub amp also to about 1200-2400 rms and 2 10's. That's why I went with the 0 gauge.

I did have a question though. I have a tsunami power block fused with mini-anl's I was thinking about getting a digital power block but it only has a single ANL for both outputs. Is that ok to do or should they be individually fused like the tsunami?

[negolien]

WEEEEEEeeeeeeee...Speaker and Excelon install tomorrow. I soooo can't freaking wait. Sucks to have not had any mids for what 3 months or more. Fking shop pissed me off so bad lol high end shop my a**...

We're gonna throw both the Infinity Kappa 693.11i's AND the stock 4x6's and tweets on the Excelon X400/4. He said he could set the gain and HPF on the 4x6's for it and I said well fk it I got a pair of Polks if it blows em up :<).... I wonder which is better the stock 4x6's from the Monsoon system or the DB461's.

Looking at the Subs now and to be honest I' am a little confused as to what to get. I' am down to American base XR-10's Sound Qubed HDS310's or Sundown Audio SA-10's. I do want loud but compared to the MTX JH45's running 500 rms I think even the lower 600rms x2 would be ok. I really would like some nice SQ as I listen to a lot of rock like LP ad 3 doors down, Metallica and crap like that.

[S8track16]

Soundqubed hds and Sundown SA-series are worth the money. I know that sundown sa's can take a lot more power than rated.

[negolien]

Yup what I thought too. I' am waiting on a confirmation on the AB wattage. I was told the XR-10's are very very SQ oriented but I think I want a little more power than 1200 rms but I' am not sure. After the MTX at 500rms 1200-1600 might be ok. The SQ HDS310's are my second choice probably. Any thoughts on the SQ of SA and SQ?