sway bar size?

[aroundincircles]

Looking for new bushings, but they come in 18mm, 19-20mm, 21mm, 22mm, and 24mm.... how do I know what size the front and rear are? anybody know? my rear bushings are quite shot, so pricing out replacing them when I do the shocks.

[sleepyalero]

Rockauto should have the correct size

[aroundincircles]

Those are the available sizes at rock auto.

[sleepyalero]

You will have to measure the bar.

45/64 takes 18mm

7/8 takes 22mm

15/16 takes 24mm

[Redog]

It all depends on which suspension package you have. Look at your RPO codes on the spare tire cover. There is a thread of RPO codes on here ;)

[aroundincircles]

Thanks, I was unaware of that. I'll look that up today when i get home.

[Redog]

You posted in the other thread that you have FE2 suspension. I'm pretty sure that's the regular duty suspension. FE3 is the sport suspension

[aroundincircles]

Ok, so what does that mean as far as sway bar size?

[falloutboy]

Sway bar MAY be smaller size.
Just lay under there and measure it, either with a caliper or just an open end metric wrench.
Be sure to measure near the bushings as it may get thinner at the ends (don't know from top of my head)

[Redog]

Honestly, I would call the a dealership and go from there. Shouldn't be too expensive of a part and they will look it up by the VIN