Interior Lights

[r53silver91s]

None of my guage lights work or the lights for the radio, heat, and all of the other stuff in that area. Last time it was just a fuse but I checked the one for int lights on the pass. side and it is not blown, should I check again or could it be something else. Please help cause I can't see anything at night.

[crazykid]

sure you checked the right fuse?

[Silentalero]

you do realize there is 3 fuse boxes in the car right?

#1 is on the drivers side panel

#2 passenger side panel

#3 Under the hood

[r53silver91s]

yeah I know there are 3 fuse boxes, but the last time that this happened it was one of the fuses on the pass side. I don't wanna pull every fuse so I was asking if anyone else had this prob so I could find out what fuse they pulled.

[r53silver91s]

I took the car in cause it was still under warranty and they said that my dimmer switch went bad. Just to let all of u know in case u run into this problem.

[keytonic]

I have this same problem. A little while after putting some lights in the instrument panel they went out along with the other stuff. I checked the fuse and it was blown so I changed it and that one blew then I changed it again and it never blew but the lights never came on either. I'll have to check the switch.

[keytonic]

Well the dimmer switch isn't the prob. The only other prob I could think of is a short. Where would I start to find that problem?

[r53silver91s]

I should of explained a little more in detail. One of the wires that run to the dimmer switch fried. They said they replaced the wire that went bad and the switch because they didnt know why it would do that.

I don't know ne thing about this kinda stuff so I don't know what to tell you, if your car is under warranty I would definately take it in.

[keytonic]

ya wouldn't happen to know which wire it was do ya? Not under warranty anymore so I'd like to fix it myself

[r53silver91s]

I'm not really sure but the guy said he took my dimmer switch out and he saw the problem right away so I'm guessing it was where the wire connects to the switch but I'm not positive.