PDA

View Full Version : Radio Wiring Harness Problem


No53Alero
01-08-2005, 09:31 PM
I just bought the radio relocation type harness from a local stereo shop. It's a Best Kits & Harnesses model #bha2004t. The installation and all was pretty easy minus routing all that wire behind the cd player. Everything works great but my front left speaker the one which the chimes run on is still running through the factory unit in my trunk and not through the cd player I installed. Every other speaker's running through the cd player, but that one. Chimes and everything work great. All the wiring looks fine and is well connected, the only thing I guess might be wrong is something in the pin setup. I'm going to call the stereo shop on monday to see if I can find something. Any Help's greatly appreciated.

mikegett
01-08-2005, 10:07 PM
I can't be of much help since I did not use the relocation harness. However, I was under the impression that the only thing the harness should be routing back to your stock radio is power and a bus signal. So, you may be right about the harness having the pins mis located.

AGT
01-09-2005, 05:15 PM
Screw the relocating...its just door chimes

No53Alero
01-10-2005, 08:39 PM
I figured it out I had a wire switched, don't install radios in the dark!