Looking For Wheel Spacers

[Oldsman]

anyone know where i can get wheel spacers that are 3/4" thick and longer studs?

i'm someone can point me in the right direction.

[Molson]

for the alero?

[Oldsman]

of course.

[Molson]

aight. 3/4 inch? big eh. I'll look around, if not, its easy to machine.

[Oldsman]

a little big but it is what is needed. i wish i have a machine at my office so i could machine them but damn boss won't get more machines in our showroom.

let me know.

[Molson]

Originally posted by Oldsman@Jan 13 2005, 12:42 AM
a little big but it is what is needed. i wish i have a machine at my office so i could machine them but damn boss won't get more machines in our showroom.

let me know.
hehe, funny eh, I don't have a mill in my office nor cruiser either.

But my father in law does ;)

[MikeSS]

I have a set of universal 3/4" wheel spacers. I have them on the back of my car, stuck the rear wheels out nicely....but since I didn't have longer lugs, my mechanic said I was going to bust them off if I didn't take off the spacers.

I am not sure where they are right now though, or I'd show you them.

[FormulaNERD]

that would be a sweet setup with some deep dish wheels and fender flares.

[mike2002]

whats the most you can space out your wheels with stock studs? i dont like how our rear wheels are tucked in so much....1/4"?

[Sundayalero]

You could probably double up on some of the smaller sized spacers...

[Oldsman]

Originally posted by MAlero@Jan 13 2005, 08:30 AM
I have a set of universal 3/4" wheel spacers. I have them on the back of my car, stuck the rear wheels out nicely....but since I didn't have longer lugs, my mechanic said I was going to bust them off if I didn't take off the spacers.

I am not sure where they are right now though, or I'd show you them.
where did you get yours?

[Sportalero]

I tried to find A/F adapters for our cars awhile back, but all i could were some from lowrider spacers and weren't sure if they were up to hard driving, which i'm sure you do. But I did find this place that does them custom. They'll give you quote on the spot, if i remember.

WheelAdapters (http://www.wheeladapter.com/wheel_adapters_and_wheel_spacers.asp)

[Oldsman]

Originally posted by mike2002@Jan 13 2005, 09:16 AM
whats the most you can space out your wheels with stock studs? i dont like how our rear wheels are tucked in so much....1/4"?
with the stock offset you got 1/2 max til the lip. so depending if you are going to tuck or not. if you want tuck don't go more than a 1/2

[Oldsman]

Originally posted by FormulaNERD@Jan 13 2005, 08:37 AM
that would be a sweet setup with some deep dish wheels and fender flares.
maybe if that was what i was doing but it's not.

[MikeSS]

I got mine at a place here in Toronto called wheels direct.

[kwhauck]

Originally posted by Oldsman+Jan 13 2005, 04:17 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Oldsman @ Jan 13 2005, 04:17 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-FormulaNERD@Jan 13 2005, 08:37 AM
that would be a sweet setup with some deep dish wheels and fender flares.
maybe if that was what i was doing but it's not. [/b][/quote]
i know what you are doing!!! :thumbsup: :thumbsup: :thumbsup: i totally appove. i have some ideas though, cuz i already researched it for my car, although not exactly the same. PM me if you want to talk about it..............

[FormulaNERD]

Originally posted by Oldsman+Jan 13 2005, 04:17 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Oldsman @ Jan 13 2005, 04:17 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-FormulaNERD@Jan 13 2005, 08:37 AM
that would be a sweet setup with some deep dish wheels and fender flares.
maybe if that was what i was doing but it's not. [/b][/quote]
i know you wouldnt be doing that, i was just commenting, lemme know if you find any.

[Oldsman]

i will let ya know.

[Oldsman]

Originally posted by 99Alero_Boy+Jan 13 2005, 04:52 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (99Alero_Boy @ Jan 13 2005, 04:52 PM)</td></tr><tr><td id='QUOTE'> Originally posted by Oldsman@Jan 13 2005, 04:17 PM
<!--QuoteBegin-FormulaNERD@Jan 13 2005, 08:37 AM
that would be a sweet setup with some deep dish wheels and fender flares.
maybe if that was what i was doing but it's not.
i know what you are doing!!! :thumbsup: :thumbsup: :thumbsup: i totally appove. i have some ideas though, cuz i already researched it for my car, although not exactly the same. PM me if you want to talk about it.............. [/b][/quote]
Damn can't keep anything a secret...................LOL

[-Alero-]

are you gonna bulldog the car?

[Oldsman]

not really just need the clearance.