How Do You Hook Up An Oil Pressure Gauge

[bjensen83]

Any of you know how to hook up an Autometer Electric oil pressure gauge? They sent this sender unit, and i have everything wired and powered, but in don't know what to connect the sender unit to. It looks like it has a 1/4" male fitting at the end which you connect some type of hose to, i think.... Here's a picture of what i got. Hope someone can help me :)

[bjensen83]

Sender unit

[bigd6983]

you remove the stock oil pressure sending unit....its located about 5 inches right of your oil filter and its threaded into the block......it takes a 1 1/16 socket to get it off, and the smallest fitting that came with the kit goes into the thread on the block, then the sending unit threads into that.......

[nguyen187]

make sure you ground out the body of the sender unit!

the stock oil pressure unit is in a different location if you got a 4banger!

[bjensen83]

thanks bigd, i'll go give that a try right now.

[bjensen83]

Got it. Thanks

[bigd6983]

no problems man....hows it look?

[bjensen83]

looks and works good. Couldn't get that socket on, so i just used vice grips to remove the factory one.

[HAZED]

any update picks