How To Install Halo Gauge

[alerocar01]

I just got some halo gauge and don't want to spend $100 to have them installed. Does any one know how to do it? Help me out.

[AnderbrA]

I have a step by step with pictures on my cardomain page

user AnderbrA

[AnderbrA]

heres the link

http://www.cardomain.com/id/anderbra

[2fst4u]

good work anderbra, everything looks great. one question on the how to, the controller wires miraculously appeared connected in between the two pics, how hard was this?(connecting the controller to the cluster)

[alerocar01]

looks good. how long did it take u to complete the process? Also how difficult was it?

[Naich]

It only takes an hour or less.... It would probably take me like 20 mintues now that I've installed a few of them.

Just be patient when you line up the lights.

[alerocar01]

what about the wiring. can u wire into the stock dimmer switch?

[Naich]

The easiest way to wire it in is to:

1. Find the gray wire going into the harness for the speedo. Get a wire splitter and hook that on from that gray wire to the positive gauge wire (Soldering it is actually the best way, but you can use a splitter to make it easier)....

2. Run the ground to the bolt behind the speedo cluster that goes into the firewall (this is an easy to find ground).

If you don't want to risk splitting the wire in the speedo harness, then use the positive wire from the cubby hole light.

[Mr_White]

try this it works with the dimmer switch

http://invision.aleromod.com/index.php?showtopic=11502

[alerocar01]

nice. thank you everyone for your help. i will put up pic. as soon as i have time to do it.