Loom

[pcaveney]

Which gauge loom to you guys use for your wiring under the hoods. i dont know if i need 3/8", 1/4" etc etc.. giong with the blue :). think it will look good with the blue loom on white of my car :) and im going to paint my engine block white and the paint the 3400 SFI blue to go with the loom... maybe could even get some white loom to do both white and blue.. maybe white for the plug wires, and white along the cold air intake, and then blue for rest of wiring.. how do you all think that will look?

[johny_boy32]

My $.02 again. Don't mix-n-match colors in such a confined area. Either do all blue in the engine bay or all white. You can go on ebay and find packages that have three different sizes for all the wires in our engine. I will see if I can get another link for you.

[johny_boy32]

Click HERE (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4556622021&category=40019&sspagename=WDVW) for the page of white wire loom.

[pcaveney]

will that be enough loom to do all the wiring under our hoods or should i get 2 kits? do you think the blue or white would look better since you suggest one color..

[johny_boy32]

stick with white because you have a white car unless your looking to change it up a bit. Its really up to you, its your car. You don't want to do every hose in your engine bay, that would be too much. I think one would be just fine but if you like more than go with two.

[jabartram]

when done cleanly this what the blue looks like, 4 different sizes, from ebay.

[ImSoBored]

I've got red under my hood, and if yours is anything like mine, they'll be filthy withing a month.

Drive down to auto zone or what ever and buys some.

[pcaveney]

what kind of paint do i need to get to be safe on the engine block? place like wal-mart have a high-heat paint?

[smlzalero]

^ Yeah, just look in the automotive section, it's there, they just don't carry the high heat clearcoat. You'll have better selection & more brands though if you go to AutoZone or another auto parts store.

BTW: I think blue loom for everything but white for the plug wires would look nice :thumb:

[pcaveney]

thats what i thought too :) white on blue looks good, and i wasnt doing like a half and half thing :) just the plugs and the 3400 SFi in white.. rest blue

[cobra621]

I plan to do my loom in red. I have done other cars in blue, and it looks great either way. I hadn't thought of doing white, I figured it would show a lot of dirt.

[pcaveney]

well i thought white would be kind of cool cuz i was going to replace the hood light with a small blacklight..

[TwistedDreams]

Did yours come stock with a hood light?

Cobra look at mine and decide if you like it,mines not done though, but its enough to decide if you like it. just click car domain down at the bottom.