Headlight Aim Adjustment

[PaulVS]

I'm sure this is easy... but since it's below freezing outside I don't feel like spending a lot of time figuring out myself.

I just put in new Sylvania Silverstars (love 'em) and discovered that my left headlight aims slightly higher than the right.

Anyone know how to adjust the headlight aim/angle?

Thanks!

[Silverknight]

try removing the lights themselves first...unpop the 2 latches that hold down the lights and the entire assembly should come right out, once you've done this it's much easier to check the headlight aim and to adjust if need be

[PaulVS]

I've already removed them... so I know how that part works....

I was wondering if there is a screw-adjustment to change the mount angle.

Thanks!

[Redog]

If it's the actual beam itsef there is a white knob at the top of the headlight but you may need a Torox driver

Check you manual, I know it's in there

[Twigz]

There are two white adjusting screws per headlight. I don't remember what size, but a small socket will fit them. The outer screws (that is the ones closest to the side markers) adjust the beam up or down. The inside screws (closest to the Olds symbol) move them left/right. Don't use a whole lot of force when turning the screws though as not to strip them. Hope this helps. :)