Grouch
11-18-2003, 04:40 PM
Originally posted by "442alero"+--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE ("442alero")</td></tr><tr><td id='QUOTE'>The Unorthodox Racing Pully puts less weight on the crank and having smaller dia. pulls less belt for Accessories thouse freeing up Horse Power UR clames 11 I say more like 5 to 7
Quality EXcel to VG all Aluminum no visible blemish
First Mod I did as it's also one of the hardest to do in what I call the Basic Mods.
What I rate as Basic. Intake, Pully, Exsaust.
Price Summit Racing 4/15/02 $177.00 Blue I picked up myself so include shipping or can go to NOPI ect.
Warning if you do not have basic Mech. skills do not attempt.
Installation
1 get floor jack or jack stands jack right side of vehicle
2 remove wheel and tire
3 remove plastic cover in wheel well
4 make sure you keep track of plastic buttons that hold inner wheel well.
5 take ratchet and untighten bolt that holds original pully.
6 remove bolt put in a safe place.
If you do not have a harmonic balancer get one now. I went to AUTOZONE
and picked up one made by NECK has a Garaffe in logo for $9.95 all prices are US
7 use harmonic balancer to pull old pully off.
8 put UR pully on
9 Take and put bolt back in pully and tighten down and torqe accordanly
10 Put inner fender back and make sure all buttons are snapped on
11 put wheel and tire back on torqe accordanly
Also Points I accadently left out
1 before jacking car up remove belt from engine
2 when untightening original pully use some type of lever to brace it as it will only spin
3 when finished put belt back on engine.
This was my first mod and it brought the engine up in revs. Responce was good and it brought out some HP but nothing special. what really impressed me was the lack of drag by the accessorys A/C P sterring and so on
If anybody else has done this mod please feel free to put in your input.
Or any questions or comments.[/b]
Originally posted by "charley99"@
yeh, i got it too
better response i think
hell of a lot lighter than stock
<!--QuoteBegin-"AmericanGirl"
I have it and I noticed a difference in acceleration, but I also put on the AEM alternator pulley on at the same time. The pulley is a great mod![/quote]
Quality EXcel to VG all Aluminum no visible blemish
First Mod I did as it's also one of the hardest to do in what I call the Basic Mods.
What I rate as Basic. Intake, Pully, Exsaust.
Price Summit Racing 4/15/02 $177.00 Blue I picked up myself so include shipping or can go to NOPI ect.
Warning if you do not have basic Mech. skills do not attempt.
Installation
1 get floor jack or jack stands jack right side of vehicle
2 remove wheel and tire
3 remove plastic cover in wheel well
4 make sure you keep track of plastic buttons that hold inner wheel well.
5 take ratchet and untighten bolt that holds original pully.
6 remove bolt put in a safe place.
If you do not have a harmonic balancer get one now. I went to AUTOZONE
and picked up one made by NECK has a Garaffe in logo for $9.95 all prices are US
7 use harmonic balancer to pull old pully off.
8 put UR pully on
9 Take and put bolt back in pully and tighten down and torqe accordanly
10 Put inner fender back and make sure all buttons are snapped on
11 put wheel and tire back on torqe accordanly
Also Points I accadently left out
1 before jacking car up remove belt from engine
2 when untightening original pully use some type of lever to brace it as it will only spin
3 when finished put belt back on engine.
This was my first mod and it brought the engine up in revs. Responce was good and it brought out some HP but nothing special. what really impressed me was the lack of drag by the accessorys A/C P sterring and so on
If anybody else has done this mod please feel free to put in your input.
Or any questions or comments.[/b]
Originally posted by "charley99"@
yeh, i got it too
better response i think
hell of a lot lighter than stock
<!--QuoteBegin-"AmericanGirl"
I have it and I noticed a difference in acceleration, but I also put on the AEM alternator pulley on at the same time. The pulley is a great mod![/quote]