Where Do I Get These...

[cruisinalero]

i was looking around car domain a while ago
but havent gotten around to posting this question...
where do i find these or how do i mod them to function like that...
thanks
here is the pic...

[mrmike]

I don't think you can get them anywhere. Looks like someone took the paint off of them and put in some brighter leds. It is a good look and wouldn't be too hard to do yourself. Do you have a link to the cardomain where you found them?

[johny_boy32]

thats on a grand am I believe, so the answer is you cant....I think????

[kwhauck]

no you can, but it is a pain in the ass......

[johny_boy32]

thanks for clearing it up. As with all things, it takes time and patience.

[cherrington17]

my only clue would be to take them out (or find a decent junk yard set) take some paint thinner to them and clear them out. (if you can) then just wire some led's under them. The hard part would be getting leds that make them bright, but not over powering.

[SikMindz]

There's a how to on GAGT.com on these. Strip the paint/vinyl on the switches and wire up LED's underneath, pretty much though.

[-Alero-]

yeah its actually not that hard, im gonan do it, i might post a how to and show some pictures of it soon.

[FormulaNERD]

Originally posted by johny_boy32+Sep 12 2005, 03:29 PM--><div class='quotetop'>QUOTE(johny_boy32 @ Sep 12 2005, 03:29 PM)</div><div class='quotemain'>thats on a grand am I believe, so the answer is you cant....I think????
Quoted post
[/b]
just to clear up, yes it can be done on an alero, the switches are clear plastic coated black.

Originally posted by turbo-alero@Sep 12 2005, 03:59 PM
no you can, but it is a pain in the ass......
Quoted post

it's not really a pain in the ass, i just tried it, took about 10 min for what i got done.

<!--QuoteBegin--Alero-@Sep 12 2005, 08:30 PM
yeah its actually not that hard, im gonan do it, i might post a how to and show some pictures of it soon.
Quoted post
[/quote]

dont bother. there is a how-to right here:
http://invision.aleromod.com/index.php?showtopic=14544

[-Alero-]

lol yo uass, you just made that, and beat me too it. : /

[sound_xtreme]

Originally posted by cherrington17@Sep 12 2005, 05:14 PM
my only clue would be to take them out (or find a decent junk yard set) take some paint thinner to them and clear them out. (if you can) then just wire some led's under them. The hard part would be getting leds that make them bright, but not over powering.
Quoted post


paint thinner destroys plastic, so i'd recommend against that one.

[AlbinoMonkeyRat]

just gently sand the black off the switches.

by "gently", I mean: don't use a dremel or any other power sanding tool, and use anything higher than 200 grit.

[FormulaNERD]

150 grit worked out nicely i put a link to my how-to up there ^

i like a little haze on them, if they're too clear, the light wont disperse right.

[AlbinoMonkeyRat]

^ well, it's easy to mess up with coarse papers. you obviously are not a spaz.

[Youngblood77]

Well Randy's got a point, Form....when ya write a how-to, ya gotta write it with the "moron modder" in mind...not everyone would take care in doing things right. I can just see someone really going to town on a set of those switches with the 150 grit, gouging the top off almost square......

" Well, he said to use 150, so....AAAARGH ! WTF? " :lol:

[cruisinalero]

thanks guys here is the site off its off a grand am....

http://www.cardomain.com/ride/395002/1

also anyone no of how he did this...

[FormulaNERD]

probably similar to the way i did this...

http://img389.imageshack.us/img389/6366/blued3s4iy.jpg