Is There A How To...

[xbxradxsx]

Is there a how to on taking apart the air vents to paint them or is it kinda easy to do once you get them out and can look at it? I've been searching forever, and can't find it.

[Menace]

they just pop out, get a flat head screw driver or somthing

[johny_boy32]

http://invision.aleromod.com/index.php?showtopic=54

[johny_boy32]

http://invision.aleromod.com/index.php?showtopic=21

http://invision.aleromod.com/index.php?showtopic=2960

[cherrington17]

check my led'n the vent page. i think i covered that at the top of it

[johny_boy32]

you must not have looked very hard....all that took me 2 minutes in the "HOW-TO SECTION"

[xbxradxsx]

Originally posted by johny_boy32@Oct 5 2005, 08:22 PM
http://invision.aleromod.com/index.php?showtopic=54
Quoted post


I've already found out how to take them out, and I know how to paint, but it says to paint the vents, you have to completely take them apart so they will still move and look right. completely taking them apart is the part I can't find.

[cherrington17]

ah. um.. take a screwdiver, and be careful. i broke my driver's side one. nothing a little epoxy didn't fix. but it won't come apart anymore. (or move.. :glare: )

[xbxradxsx]

Originally posted by johny_boy32@Oct 5 2005, 08:25 PM
you must not have looked very hard....all that took me 2 minutes in the "HOW-TO SECTION"
Quoted post


And you must not have read the "HOW TO SECTION" enough to see that it doesn't tell you how to disassemble them, not take them out.

[johny_boy32]

look at the other two links I put up there you dink, its all in there....what else do you want?

[johny_boy32]

http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21
http://invision.aleromod.com/index.php?showtopic=21

[Travis99Alero]

kick his ass, seabass.

[xbxradxsx]

Originally posted by johny_boy32@Oct 5 2005, 08:41 PM
look at the other two links I put up there you dink, its all in there....what else do you want?
Quoted post


And would you read the damn links that you posted just one time and see that it doesn't tell how to take them APART. I know how the hell to take them out. That's not what I want to know. I want to know how to TAKE THE THINGS APART, not TAKE THE THINGS OUT. There is a diff. in taking something APART and taking something OUT. Did you know that? Do you know how to comprehend between the two? You try to get smart and don't know what the hell you're even talking about.

[xbxradxsx]

Originally posted by johny_boy32@Oct 5 2005, 08:41 PM
look at the other two links I put up there you dink, its all in there....what else do you want?
Quoted post


Click go here, scroll down to post 9 by Silentalero, read. I think that the only problem with understanding what I'm talking about would be a lack of your functioning brain power

go here (http://invision.aleromod.com/index.php?act=Post&CODE=02&f=7&t=14935&qpid=241254)

[ImSoBored]

**The trim is held onto the vent by more clips

thats all it says johny. That ^^ is what hes trying to do. hes got them out already.. Hes trying to remove the trim from the vent.

xbx johnys an idiot, don't listen to him. Its obvious what your asking.
im not sure how to remove that

[johny_boy32]

this isnt rocket science. Get the vents out, take a flat head screw driver, then lift the clips holding the vents together. If you knew anything about anything you would know that.

[xbxradxsx]

Originally posted by johny_boy32@Oct 9 2005, 07:16 PM
this isnt rocket science. Get the vents out, take a flat head screw driver, then lift the clips holding the vents together. If you knew anything about anything you would know that.
Quoted post


Look man, I was wanting to know if there was a how to or something so I could see how much work it would be to do it before I took them out. To kinda know about how long it would take or something. It's okay though, cuz I took the driver side one out to look at it the other night. Thanks for the help anyways.