never mind the vents. new subs drown them out.

New PROBLEM

I can hear my trunk rattler form the outside of the car. It's not the tag.
It seems to be where the plastic meats the metal about the tag, in the separtation. If i put my fingers where the bulb is, it stops. If I push on the Alero emblem, it stops. Pressure in either direction seems like it would be effective. Any suggestions on how to acomplish this?

i took off that section and every spot behind it where it could contact, used put some foam weather stripping. but, this isn't a permanent fix. i had no rattles at all for a while (this was about a year ago) but now they are louder than ever. but it will hold you over til u can get mat or just do it again like i'm gonna.

ok i kinda swear by rubber washers for quickfixes like that , will they work and how do you get it apart

any other suggestions

is there a way somting could be wedged there that would stay and not rot or somthing

i had rattle in that same piece..... so i bought a little bit of dynamat and put about 3 layers on the back of that piece. fixed it no problem. then i had a rattle on the top of the trunk, so i put 2 pieces under that.....FIXED. no more rattles.......this was about 2-3 years ago

this may be retarded but is there a how too on dynomat

^^^
www.google.com helps with questions like those

http://www.crutchfield.com/S-HeUhYo6...mat_movie.html

ahh ok looked easy enough but how do i get the trunk apart to do it, remember im new

if u just look at your trunk its pretty obvious. there are a bunch of little plastic hook looking things that unscrew for the removal of the sides. just looks for screws and whatnot. use common sense, new or not


edit: once again try google.

"rattle at alero emblem"
 

i got iride of tat ratle,by putting in a red splinter of wood and breaking it off(lmfao).cant even notice till up close and put enough pressure of it to take away vibration.

i saw on an older forum i guy used clear silicone, was pretty specific in an how to style, the post was maybe 3 yrs old, but i checked his thing and it said active a few days before, so i pm'd him about it to try and find out how the clear silicone has held up, anyone got an idea about it

i did this it stoped mine

now on to why i posted, i fixed that peice rattle like i said and i fixed the clips that broke on the bumper cover, now my only rattle it sthe very top of the trunk lid where it meets the glass, how do i work on this one???

What I did to my'n was use 3M double sided foamy tape.

3M VHB tape


Just got it apart to where I could get the tape in there and stuck it on, I also used in on my plate, lol when it comes off its taking some paint.




Well what ever you do, don't do what my buddy did and just put to much door gap tape in there to make more pressure and eff up the seal.

i used those strips of foam you put around doors to seal it. put that on the bottom of the trunk panel... when i put the plastic thing on is was quite tight... rattles alot less now. For the license plate... took it off... put more of that foam around the edges and middle... used 4 screws... tightened it good... no more rattle.

and to stop the plastic thing... took off the plastic clips (they just kept snapping when i put new ones one) so took a metal washer on each side... and a spacer and tightened the shit out of them... and bam... tight connection... i can take pictures if needed... i still need to dynomat the trunk

no all i have wrong now is the seal at the very top of the trunk, it may not be fixable

i took the whole back of the trunk off and put this Raatmat on it(same as dynomat) but it pretty much took away almost all of the rattle from right above the licence plate. and it sounds ok.

i got all my rattles fixed except the top of my trunk, its where the edge meets the back glass?

anyone know anything i can do?

i ran into the same problem as i have to 2 12's also.
for the plastic piece thats above the license plate i took it off and put a piece of hushmat (cheaper version of dynomat) on there it made a big diffrence so i would assume it would be better to put 2 strips on there.

for the license plate i also put some strips of the mat on the back with 4 screws no rattling at all.

now last but not least the trunk lid the meets with the rear window.
i once again put the mat on the inside right where it was rattling it didnt stop it completly but it did help. i only put on one piece tho, so obvliosy put more where it is needed.

you will still have rattles here and there but those are the main ones you wanna get rid of for they are the loudest.

afugys 3m tape works like a charm. he was kind enough to let me use some to seal the two pieces together.. completely stopped the rattling. the only rattle i have now is where the back window meets the trunk and the flaps by the gas hole on the inside of the carpet

where the plastic part meets the metal, i took one of the licence plate light screws out and ran a long ass sheet metal screw all the way through the metal behind it an no more rattle