Aleromod.com

Aleromod.com (http://www.aleromod.com/forums/forum.php)
-   Audio, Video & Security (http://www.aleromod.com/forums/forumdisplay.php?f=16)
-   -   FI BTL 18 fully loaded DAMN!!! (http://www.aleromod.com/forums/showthread.php?t=32663)

sleepyalero 10-25-2010 04:19 AM

Quote:

Originally Posted by Cashdollar2009 (Post 562108)
Haha thanks, and i'll let her know. It's actually on a piece of 1/8" balsa wood. I hit it with the same texture spray I used on the box. Put two coats of white on top of that. Gave her a brush with some black paint and she free-handed it. Then four penny-nials in the corners and she was on. I think it turned out nice as well. :beerchug:


haha damn well she did a good job thats for sure,

oh and i appreciate how you liked my picture for AOTM. :lol:

Cashdollar2009 10-25-2010 04:21 AM

Back on-topic. We are blowing up Aleromod. lol This place is always so dead anymore... There better be a build log for this. I really want to see how you figure out your box.

sleepyalero 10-25-2010 04:24 AM

Quote:

Originally Posted by Cashdollar2009 (Post 562112)
Back on-topic. We are blowing up Aleromod. lol This place is always so dead anymore... There better be a build log for this. I really want to see how you figure out your box.


hahaha yeah very true!

scott192 10-25-2010 04:31 AM

oh i will do ill try and make a vid of most shit and pics of everything else and heres a lil teaser of what a w7 can do lol not to mention what this btl will do

Cashdollar2009 10-25-2010 04:35 AM

Oh poor stock piece of shit. lol I can't believe it was taking that much pressure to do that!

sleepyalero 10-25-2010 04:41 AM

:haha: :lol:

scott192 10-25-2010 04:45 AM

you should have heard the rattle that was making :| i thought i effin blew my sub!! i was trippin balls and i open the trunk every sounds good...so im scratching my head a lil thinkin WTF so i decide to rip apart the rear deck... nothing loose so bump some shit and it was hittin the fabric on the top so hard there was a rip in it haha so had to cut it open to see what had happened and got a good laugh so currently on fronts and got tweets in the back thats it thinkin about puttin 5 1/4 in the sides instead of the read deck not like i need them in the trunk to reflex the bass from them

scott192 10-25-2010 04:54 AM

to top it off it isnt blown if you hold the tweet it sounds great!! glued it up and using it in the garage in an old 6x9 box lol

scott192 10-26-2010 06:22 PM

so im thinking about 38x15x24 and its 5.95cf before bracing but im thinking im gonna use 1" with a 4x15 port still doin more measuring and math ill be on in a bit to let u know what i come up with

MattismodderX 10-26-2010 06:44 PM

Quote:

Originally Posted by scott192 (Post 562117)
oh i will do ill try and make a vid of most shit and pics of everything else and heres a lil teaser of what a w7 can do lol not to mention what this btl will do


LOL this happend to my stock 6x9. i laughed and then smashed it in the driveway. i want to see how this 18 will fit in our cars. ill be upgrading my audio as well within the next month

Cashdollar2009 10-26-2010 06:51 PM

Quote:

Originally Posted by scott192 (Post 562477)
so im thinking about 38x15x24 and its 5.95cf before bracing but im thinking im gonna use 1" with a 4x15 port still doin more measuring and math ill be on in a bit to let u know what i come up with


If you are using 1" wood i'm coming up with a port length of 32 inches to achieve a 32Hz tuning. You're gonna have to make your port a bit skinnier in order to achieve the length to area ratio you want to get your tuning since 32 inches is gonna be impossible to get when the box is only 24 deep. Either way you are looking just over 4ft^3 after all displacement. This Torres calculator is about as good of a tool as you can get when building a box. :)



Edit: If you were to go with a port of 4H X 10W X 15L you will get 31.95Hz and 5.22ft^3 AFTER all displacement. :)

scott192 10-26-2010 07:12 PM

Quote:

Originally Posted by Cashdollar2009 (Post 562482)
If you are using 1" wood i'm coming up with a port length of 32 inches to achieve a 32Hz tuning. You're gonna have to make your port a bit skinnier in order to achieve the length to area ratio you want to get your tuning since 32 inches is gonna be impossible to get when the box is only 24 deep. Either way you are looking just over 4ft^3 after all displacement. This Torres calculator is about as good of a tool as you can get when building a box. :)



Edit: If you were to go with a port of 4H X 10W X 15L you will get 31.95Hz and 5.22ft^3 AFTER all displacement. :)


yea i effed up the ports gonna be 4x13 still effin around

scott192 10-26-2010 07:33 PM

this is what im doing i think i hope to god it fits!!!

scott192 10-27-2010 02:11 AM

well im very happy today i went to rona and got the wood 1" sheet mdf = 69 bucks and another 50 bucks worth of shit..lucked right out and buddy cut all my cuts at the store for free!! and it all fits MINT!! but its to late and im to buzzed to start this tonight so ill charge up the digital camera and get a good rest for tomorrow!!! its gonna be SWEET!! Look for pics tomorrow!!

Cashdollar2009 10-27-2010 02:58 AM

Quote:

Originally Posted by scott192 (Post 562531)
well im very happy today i went to rona and got the wood 1" sheet mdf = 69 bucks and another 50 bucks worth of shit..lucked right out and buddy cut all my cuts at the store for free!! and it all fits MINT!! but its to late and im to buzzed to start this tonight so ill charge up the digital camera and get a good rest for tomorrow!!! its gonna be SWEET!! Look for pics tomorrow!!


Tuned in. :)

MattismodderX 10-27-2010 02:45 PM

Quote:

Originally Posted by Cashdollar2009 (Post 562536)
Tuned in. :)


:popcorn: cant wait to see this thing in our baby trunks

hopefully i can fit 2 AB XFL 15s in the trunk. next months project!

scott192 10-29-2010 04:07 AM

box is built!! sub is in!! not in car yet so crossing fingers!! looks like it should tho...all i can say is wow looks amazing!! check it out!!!

sorry for the low quality in advance its my blackberry







soooo empty!! car feels sooo light without a sub in it!! and the red wire you see is not the amp power wire that is speaker wire!! 8 gauge lol


Cashdollar2009 10-29-2010 04:12 AM

Looks good! :beerchug: Let me know how easily that box goes in!

And did you make the port a little short at first? lol Been there done that.

scott192 10-29-2010 04:57 AM

if your gonna build a box tho damn that pl premium ultra is effin awesome easy as eff to control and you can see as it starts to harden 3x faster dry 3x stronger bond damn!! and forgot say b4 those handles will have foam under them and taped down for no rattles but im so happy i put those on cause that effin thing is heavy!! id say easy 200lbs

scott192 10-29-2010 09:37 PM

its in
 
Well it was a hellish tight fit had to sand down the front corners just to get the box in!! But holy shit!!! Soooo loud and clear!! Hits the low's amazing!!! I will get a vid up when I'm home!!! I am so happy just wish I made it 37" wide lol and 21" deep its a lil big!! You'll see


All times are GMT -4. The time now is 11:52 PM.

Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.