Aleromod.com

Aleromod.com (http://www.aleromod.com/forums/forum.php)
-   Common Questions & Troubleshooting (http://www.aleromod.com/forums/forumdisplay.php?f=17)
-   -   window washer sprayers don't work (http://www.aleromod.com/forums/showthread.php?t=16184)

greenbastard 01-11-2007 11:54 PM

window washer sprayers don't work
 
monday at 3:15pm after school I started my car and turned my wipers and sprayers on to clear the ice on my winshield. about 5 minutes later i was downtown to pick up my mom and they wouldn't spray. they didn't dribble or anything. i assumed that they were frozen because i filled it up 2 days ago and haven't used them much. i had -35'C in it and it was only -20'C or something close. so today it's -42'C with the wind and i washed my car and parked it in my heated garage for 2 and 1/2 hours and they still don't work. could it be clogged? could the pump be shot? has anyone else had this problem. please help me.:(

Redog 01-12-2007 12:02 AM

Do you hear the motor whirring?

Any broken hoses?

greenbastard 01-12-2007 12:09 AM

i don't think so and i'm not checking now because it's -45'C outside and i'm going to bed.

AlbinoMonkeyRat 01-12-2007 12:20 AM

they're not broke, they're frozen. lol

Vinalero 01-12-2007 03:11 AM

The Alero is my third car with wiper-mounted-windshield-washer-tubes. It happens all the time.

When I had my Dynasty, I can't recall how many times I got the tubes out of the wipers to get them inside to clean them properly.

One thing I did before to check if it was only the tube that was clogged is unplugging the rubber tube where it connects with the washer liquid tubing under the hood. On the Dynasty, they were heading up just in front of the windshield where generally all the ice and snow gather and thats why they were always frozen, so when unplugging them and trying the washer, it did a nice blue fountain over the car :lol: .

BUT Maybe on Aleros the tubes aren't hooked like this. Haven't checked yet.

brim 01-12-2007 09:52 AM

lol @ -45

if it froze it froze, if you hear the motor go when you push the switch, it may have/might blow apart a section of the line. or the motor exhausted itself and burned out

Alero2k4 01-12-2007 11:53 AM

When mine froze a couple weeks ago and it took a few days of warmer weather for it to unthaw, oh, and I drove the car around for like an hour so it would have nice underhood temps ;)

greenbastard 01-12-2007 12:02 PM

i don't think i will worry about it for now. i have to do a motor in my Optima and i will tinker with it when i can. i'm guessing it is the motor because i can't hear it running.

Alero2k4 01-12-2007 12:25 PM

I still bet it is just frozen, I thought maybe mine had crapped out too, but it was just frozens.

HazMatt24 01-12-2007 12:34 PM

frozen wiper fluid = reason to move south

greenbastard 01-12-2007 12:39 PM

no man it's nice having snow and cold weather because you can drift without using your e-brake.

HazMatt24 01-12-2007 12:53 PM

dusty desert roads work year round

AlbinoMonkeyRat 01-12-2007 12:59 PM

Quote:

Originally Posted by greenbastard (Post 249926)
no man it's nice having snow and cold weather because you can drift without using your e-brake.

I did some of thise the other day. I didn't want to, but I did it! lol

off ramp was icy. luckily it was 2am and no traffic. I pulled a wide U-turn going sideways

Vinalero 01-15-2007 01:13 AM

Quote:

Originally Posted by AlbinoMonkeyRat (Post 249934)
I did some of thise the other day. I didn't want to, but I did it! lol

off ramp was icy. luckily it was 2am and no traffic. I pulled a wide U-turn going sideways



You are lucky. It happened to my cousin 1 year ago at 2-3 am at 50 km/h on a 85 km/h suggested ramp. The car went sideway, then tried to get it back straight. One of the back wheel hit the side of the road while sliding where there was some snow that gathered, and the car flipped on the top. 8 000$ of dmg. :(

greenbastard 01-17-2007 09:47 AM

they work now because yesterday was really warm out. the funny thing is i didn't hear the motor running when they were frozen. meh they work.

elitecloud 01-17-2007 10:06 AM

you guys have the part number or any other information as to where i would order a new hose and part that actually fits onto the bottle at?

the "nipple" for lack of other works broke inside the hose fitting, so i need to either cut back the hose and put another fitting on there, or just replace it all.....and i need another black nipple thingy...

stfu to anyone who makes fun of me for saying nipple, pervs..

greenbastard 01-17-2007 10:20 AM

check with a salvage yard. in Regina SGI our car insurance company has all totaled vehicles in a big lot (SGI Salvage). I could usually get parts like that from there. check if you have a place like that, they might have what you need.


All times are GMT -4. The time now is 09:39 PM.

Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.