Aleromod.com

Aleromod.com (http://www.aleromod.com/forums/forum.php)
-   Common Questions & Troubleshooting (http://www.aleromod.com/forums/forumdisplay.php?f=17)
-   -   drivability problem. please help. (http://www.aleromod.com/forums/showthread.php?t=16437)

hahano404 02-02-2007 08:02 PM

drivability problem. please help.
 
.....

MixtapeMessiah 02-02-2007 08:52 PM

by saying maf im guessin u got a 3.4? what kind of problems did u have with the filter? and explain more when u say the rpm bounces around between 40-50 mph...

MixtapeMessiah 02-02-2007 08:53 PM

ur maf maybe screwed up, if it keep fluctuating tryin to find a good setting

[ion] C2 02-02-2007 09:15 PM

Quote:

Originally Posted by MixtapeMessiah (Post 254315)
ur maf maybe screwed up, if it keep fluctuating tryin to find a good setting


--------

Quote:

Originally Posted by hahano404 (Post 254315)
so i bought a maf and the prob is still there.


freakout 02-02-2007 09:29 PM

By "lock up" I think they mean the lock up tourque converter. I'm not sure what speed/rpm the converter is setup to engage. But it would cause the rpms to bounce if it engaging/disengaging. How much is the rpm bouncing around 2-300 or 1-1500?

hahano404 02-03-2007 02:42 AM

.....

AftermathAlero 02-04-2007 12:05 AM

Wait.. u used a brushed to clean the MAF? All you needed to do is spray on some carb cleaner (or electrical contact cleaner) on the sensors and done. Brushing them will damage it. But they do sell a MAF sensor cleaner spray now at autozone.

but as far as RPMS bouncing.. is the fuel filter been changed? injectors cleaned?

Redog 02-04-2007 12:09 AM

Could also be time for new plugs. My car acted that way when the #5 plug was effed. It was a misfire!

hahano404 02-04-2007 02:12 AM

.....

hahano404 02-04-2007 02:20 AM

.....

freakout 02-05-2007 05:24 AM

The lock up converter is controlled by the computer. A tourque converter never transfers engine speed at 1:1. There is always a bit of a lose due to the hydralic coupling. The "lock up" feature turns the tranny input shaft at the same speed as the motor.

hahano404 02-05-2007 10:05 PM

.....

Cliff8928 02-06-2007 02:14 AM

You did put the MAF on the right way, right?

hahano404 02-06-2007 04:56 PM

.....

hahano404 02-07-2007 08:32 PM

.....


All times are GMT -4. The time now is 02:35 PM.

Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.