Aleromod.com - IAT Sensor

Aleromod.com (http://www.aleromod.com/forums/forum.php)

- Common Questions & Troubleshooting (http://www.aleromod.com/forums/forumdisplay.php?f=17)

- - IAT Sensor (http://www.aleromod.com/forums/showthread.php?t=20903)

AtomicX

02-05-2008 04:12 PM

IAT Sensor

Hey Im installing the AEM short ram intake, how do I take out the IAT sensor out of the S curve piping (The Female connector part)?

==Edit==
NVM I got it but it was a BITCH and 1/2

AGT	02-05-2008 05:18 PM

Just pull it out of the hole...like a female

alerored04

02-05-2008 05:23 PM

no, with females you stuff it in the hole then remove it after a while.

TheMeaningOfLife

02-05-2008 06:48 PM

Just lube it up and jerk real hard....

CBLOHM3400

02-05-2008 07:24 PM

wow who knew that question would lead to that

01silveralero

02-05-2008 08:12 PM

:emotlol:

Vinalero

02-06-2008 08:02 PM

When I had to put my IAT back in hole of the new tube, I had to stretch the borders of the hole with a metal file in order to make it fit...

AtomicX

02-06-2008 11:36 PM

Quote:

Originally Posted by Vinalero (Post 333204)

When I had to put my IAT back in hole of the new tube, I had to stretch the borders of the hole with a metal file in order to make it fit...

I just took a screwdriver and stretched the grommet out, even then the IAT would not go in, I figured out that you don't push it straight in, you tilt the IAT to one side :rolleyes2:

Vinalero

02-07-2008 11:48 AM

Nah, it just didnt fit even without the grommet in the metal tubing of my WAI, I had to make the hole bigger

All times are GMT -4. The time now is 12:45 AM.