Eibach Sway Bar Group Buy!
 

Ok, so after talking with Eibach this morning it seems that they are more than willing to make us some sway bars.

Haven't gotten details from them on pricing but they have verified that they can make them for us and are willing to do so. Pricing will likely be around the same cost as other currently available Eibach Sway Bars which is around $110-200 each

Spec's are as follows:

Stock front FE2 - 24mm hollow
Stock front FE3 - 24mm solid
Eibach front - 28.6mm

Stock rear (all) - 15.3mm solid
Eibach rear - 22.2mm solid

We already have the minimum 25 of each bar counted for but if you are still interested in purchasing a set or even just one bar please post up here until the deadline we post next week.

These bars will fit all 97-05 Malibu/Classic, 99-05 Grand Am, 99-04 Alero and 97-00 Cutlass

FRONT BAR 27 down 0 to go
Lvemy3100 - 2 PAID
WidbyJ - 2
Cenko10 - 1 (unitedmalibus.com) PAID

cmtapanes - 1 (grandamgt.com)
HaVoK~DOGZ~ - 1 (grandamgt.com)
i_ammetal - 1 (grandamgt.com)
zerocool - 1 (grandamgt.com)
ace_332 - 1 (grandamgt.com)
Grandamgtblk99 - 1 (grandamgt.com)
KrazyGT-03 - 1 (grandamgt.com)
Mac0083 - 1 (grandamgt.com)

whitemexican - 1 (aleromod.com)
strtrydr - 1 (aleromod.com) PAID
jabartram - 1 (aleromod.com) PAID
heineck - 1 (aleromod.com)
keytonic - 1 (aleromod.com)
guiguilandry - 1 (aleromod.com)
billytheman1188 - 1 (aleromod.com) PAID
KenshinZero - 1 (aleromod.com)

a03grandamgt - 1 (gaownersclub.com) PAID
tgussie666 - 1 (gaownersclub.com)
95blackz26 - 1 (gaownersclub.com)
joemomma - 1 (gaownersclub.com)
tamilrmx - 1 (gaownersclub.com)
emncfi - 1 (gaownersclub.com) PAID

REAR BAR 28 down 0 to go
Lvemy3100 - 2 PAID
WidbyJ - 2
Cenko10 - 1 (unitedmalibus.com) PAID
adrian13 - 1 (unitedmalibus.com) PAID

cmtapanes - 1 (grandamgt.com)
HaVoK~DOGZ~ - 1 (grandamgt.com)
i_ammetal - 1 (grandamgt.com)
zerocool - 1 (grandamgt.com)
ace_332 - 1 (grandamgt.com)
Grandamgtblk99 - 1 (grandamgt.com)
KrazyGT-03 - 1 (grandamgt.com)
Mac0083 - 1 (grandamgt.com)

bentiac - 1 (aleromod.com)
whitemexican - 1 (aleromod.com)
strtrydr - 1 (aleromod.com) PAID
guiguilandry - 1 (aleromod.com) PAID
billytheman1188 - 1 (aleromod.com) PAID
KenshinZero - 1 (aleromod.com)

GAGTRider - 1 (gaownersclub.com) PAID
a03grandamgt - 1 (gaownersclub.com) PAID
MAD MARK - 1 (gaownersclub.com) PAID
95blackz26 - 1 (gaownersclub.com)
joemomma - 1 (gaownersclub.com)
tamilrmx - 1 (gaownersclub.com)
emncfi - 1 (gaownersclub.com) PAID

UPDATE 7/9/10 - Price for the GB is 185+ shipping each. This price includes mid point bushings.

Listing is up on the store for payments:

Rear Bar - http://mpracing.org/store/index.php?...&productId=550

Front Bar - http://mpracing.org/store/index.php?...&productId=549

The deadline I am setting is if we dont have all the payments by the 14th of August I will have all payments refunded to everyone who made them by no later than August 21st

Rear one for me.

done

Couple questions...........

1. any ideas on what the cost would be?

2. how does the diameters compare to the Speedbuilt ones?

Sizing will be the same as the ones speedbuilt used to make however material used may be different.

As for pricing we are basically looking at around the same cost as the bars Eibach currently makes. From what I have seen this ranges from about 110-180+ shipping. I wont have more definitive pricing until the stock bars arrive at their private labeling department. They were shipped UPS Ground so basically in about 2-6 business days I will have a definite price for each bar.

Are you advertising this on the GA forum as well? They will have more people who are interested in this.

yes this is also posted on the grandamgt.com and unitedmalibus.com forums.

ill be down for a front and rear

will this also come w/ new bushing and the bigger brackets for the sway bar??

Since I'm going to probably not be able to find a set of Speedbuilt Sways again; I should probably get in on this. With that said count me in on a set for sure and maybe one more (gotta check on that though.)

done.. as for bushings I am sure something will be worked out but I cant say anything for sure right now. Worst case we can always get the bushings meant for the speedbuilt ones from pfyc since the bars being made are the same size. http://www.pfyc.com/pc/GA4008/GASUSP...or+N-Body.html


done.. let me know when you find out for sure about the other set and I will put you down 2 of each.

wilco

Sweet :yahoo:

also i dont know if you did but you can post this on gaownersclub too

im in for a front.

I will go ahead and post this up over there as well.

count me out for the second set ...

ok

cant say for sure until i get a price, and the final date i need to have the money by

Still need 13 Front and 12 Rear

Got any pictures of them or simular to what they will look like?

id be down for a set. front and rear,but if it comes out to too much then just a front