Aleromod.com

Aleromod.com (http://www.aleromod.com/forums/forum.php)
-   Common Questions & Troubleshooting (http://www.aleromod.com/forums/forumdisplay.php?f=17)
-   -   Driver side wiper blade help. (http://www.aleromod.com/forums/showthread.php?t=34925)

Shiwnath 10-15-2011 04:12 PM

Driver side wiper blade help.
 
So my girlfriend was telling me that her driver side wiper blade doesn't fully extend to the left side of her windshield. Today it was raining and we both were out driving and I compared how much her wipers go to the left side and to how much mine did and there was about 1" difference. How could I fix hers so that it goes towards more to the left before it sweeps back to the right. Before she bought her Alero, the windshield was replaced...I dont know if that matters.

robalero 10-15-2011 04:21 PM

were does it sit when the wipers are parked? they might be too low in the nuts at the bottom of the windshield and need to go up one more time

Shiwnath 10-15-2011 04:41 PM

OHHH!! Never had to do something like that before.. Easy fix lol.. Thanks Rob

+1 Rep

robalero 10-15-2011 05:12 PM

no problem glad I could help

Redog 10-16-2011 12:59 AM

I know this isn't what you are looking for, but whatever the size of the wipers in inches, I plus sized both of them 1 inch

Shiwnath 10-16-2011 02:57 AM

So instead of 17 & 22, you went with 18 & 23? Hows that working for you?

Fuzzyspudkiss 10-16-2011 01:48 PM

Whatever the stock size is for the passenger side is doesn't form to my windshield and doesn't properly wipe the bottom passenger side corner... I cant imagine how bad it would be if I went 1" over... maybe its just the latitudes i bought...

robalero 10-16-2011 03:29 PM

I went with 16" for the pass one cause that bottom area was pissing me off of not cleaning properly lol

Rivais16 10-16-2011 09:25 PM

Quote:

Originally Posted by robalero (Post 599140)
were does it sit when the wipers are parked? they might be too low in the nuts at the bottom of the windshield and need to go up one more time


Genius! Thanks a million! Shiwnath fixed it for me in 5 mins :thumb:

robalero 10-16-2011 09:51 PM

and your welcome rivais

Papa Rad17 10-17-2011 02:42 AM

iv found that the rainx latitude wipers work amazing and so far have lasted longer. Im, glad you posted this to, iv been noticing mine acting a bit wired recently, I'll look into it.

Shiwnath 10-17-2011 08:04 AM

Quote:

Originally Posted by Papa Rad17 (Post 599212)
iv found that the rainx latitude wipers work amazing and so far have lasted longer. Im, glad you posted this to, iv been noticing mine acting a bit wired recently, I'll look into it.


I agree that RainX blades do work really well. I also like their spray that beads up rain on windshields. To adjust the wiper blade all you need is a flat head to pry off the round cap where the wiper blade is mounted and then you'll need a 1/2" socket with a socket wrench and then your good to go.

Papa Rad17 10-17-2011 08:07 AM

Quote:

Originally Posted by Shiwnath (Post 599226)
I agree that RainX blades do work really well. I also like their spray that beads up rain on windshields. To adjust the wiper blade all you need is a flat head to pry off the round cap where the wiper blade is mounted and then you'll need a 1/2" socket with a socket wrench and then your good to go.


awesome. thanks

Fuzzyspudkiss 10-17-2011 03:01 PM

Quote:

Originally Posted by robalero (Post 599186)
I went with 16" for the pass one cause that bottom area was pissing me off of not cleaning properly lol




yeah I might have to do that the next time I buy wipers. I actually didn't notice it happening as bad with my motorcraft ones, but these latitude ones really don't seem to want to conform.

robalero 10-17-2011 03:45 PM

which motorcraft ones do you have the flex type blade or the full solid one? I really like their flex blade only other ones I can find that compare is the bosch ones but the ford ones are cheaper and have lastest me almost the longest ( compared to the bosch that I had on the aurora )

Papa Rad17 10-17-2011 05:15 PM

Quote:

Originally Posted by Fuzzyspudkiss (Post 599278)
yeah I might have to do that the next time I buy wipers. I actually didn't notice it happening as bad with my motorcraft ones, but these latitude ones really don't seem to want to conform.


you did take the shild off the blade part right? my buddy got them for his and werent happy with them at all till we relized he didnt take it off, they work like a charm now.

Fuzzyspudkiss 10-17-2011 05:51 PM

I'm not entirely sure, the Ford Dealership put them on it before I bought the car. I really liked them and they fit the windshield very well, so I'm assuming they are the flex type.

Your talking about the clear plastic part that was on the wiper right? Cause yeah, I removed that lol.

robalero 10-17-2011 06:21 PM

if they were one solid piece ( no metal ) then its the flex ones the other ones are just the reg plain jane wipers....personally I love the flex ones I find they work good even in the winter

Fuzzyspudkiss 10-17-2011 06:59 PM

Here's the problem with the latitudes that I have run into.



It doesn't connect with the windshield at the end and it doesn't do so all the way until about 6 inches (maybe more) up the windshield...leaves and ugly corner dirty spot that the wipers cannot clean

robalero 10-17-2011 07:42 PM

yup thats the issue that I had so I went to the 16 inch


All times are GMT -4. The time now is 12:02 PM.

Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.