Polyurethene Bushings
 

I know that i have seen a few people, like Richie, upgraded control arm bushings and other suspension bushing so I would like to know what part numbers to use to upgrade.

http://www.summitracing.com/parts/PTP-7-234/

Those are the ones I have. I have heard they fit the stamped steel arms also but don't know for sure.

Also used these for the endlinks. http://www.summitracing.com/parts/ENS-9-8105R/

the sway bar kit will that also work on the rear?

You can also check the Energy Suspension catalog - I go to www.energysuspension.com and work from there. I usually order from www.energysuspensionparts.com - which isn't directly related to ES.

Do be aware that it may list part Z for a Grand Am and not an Alero sometimes. Or, for most suspension parts, it may list a 1998-1999 Cutlass or a 1997-2004 Malibu. Or not.

RwP

No because the endlinks on the rear are different. I have a extra set of rear endlinks that I need to measure and try to match up with poly bushing though. When I find that out I will let you know.

let us ALL know please. I wanted to do this years ago but could never find all the bushings. This info can be good for people wanting to do it in the future. Get that info on here now! ;)

I'm getting there billy.

there are no ploys for the rear end links, you would have to make custom 2 piece brackets for the rear end links, i started working on a design but never finished.