Aleromod.com

Aleromod.com (http://www.aleromod.com/forums/forum.php)
-   Alero Appearance (http://www.aleromod.com/forums/forumdisplay.php?f=13)
-   -   Cluster Gauge trim install? (http://www.aleromod.com/forums/showthread.php?t=36745)

@mgaw23 01-30-2013 12:59 PM

Cluster Gauge trim install?
 
i ordered my self one of these for my car how hard is it to put on?

billytheman1188 01-30-2013 01:06 PM

It's simple.

Lower steering wheel all the way, take out two 7mm (i think) bolts that hold the black trim on. Pull that out (unplug the trip meter button) then take out the 4 7mm bolts holding the cluster in....pull cluster out some and unplug it. Now you have the cluster sitting on the table.....turn it face down and find the little black tabs that hold the clear plastic piece to the cluster.....pop them one by one and gently start prying it apart until it separates.....throw that thing on and out it back together.

When taking the cluster out of the car (and the trim that goes around it) be careful. You have to tilt it to get it out of the hole.....don't just yank the pieces out or you will break something.

spc2125 01-30-2013 05:38 PM

I want to say that you have to remove the needle... dont quote me on that but I think thats how my needles got messed up

tw0123 01-30-2013 05:53 PM

Not with that faceplate... if it was the actual gauge overlay it would be required but still not necessary. I got mine on without taking the needles off just had to be really careful.

Billy got this installation bang on! Simple as anything just be patient so you don't lose clips or screws!!

@mgaw23 02-19-2013 11:26 AM

K I finally got it in the mail today I'm going to put her on! Haha I also ordered more chrome for the car ill post picures in a bit! But for now I need to figue out how to put the thing on!

@mgaw23 02-19-2013 12:08 PM

So I just got in from trying to put it on and its -46 out side so I let my car warm up and then tryed it but I lost a bolt so came in and said eff it! I spent like 20 min trying to disconect the trip button!

billytheman1188 02-19-2013 05:24 PM

Quote:

Originally Posted by @mgaw23 (Post 633374)
So I just got in from trying to put it on and its -46 out side so I let my car warm up and then tryed it but I lost a bolt so came in and said eff it! I spent like 20 min trying to disconect the trip button!


lol...20 min on the button!? :eek:

03glgold 02-19-2013 05:26 PM

it is super easy...you take a screwdriver and lift the lock tab and boom it is done

tw0123 02-19-2013 10:33 PM

lol when its that cold out, rational thinking goes out the window pretty quickly!! been in this position many times before... great thing of being in Canada!!!

jawa 02-20-2013 08:56 AM

Quote:

Originally Posted by tw0123 (Post 633406)
lol when its that cold out, rational thinking goes out the window pretty quickly!! been in this position many times before... great thing of being in Canada!!!


eff yea when its that cold out you try and get shit fixed asap

03glgold 02-20-2013 09:02 AM

I know the feeling here as well...there are times when it gets plenty cold in Kansas...luckily the ultra super crappy levels of cold have stayed away this year and it has only gotten down to super crappy temperatures a few times


All times are GMT -4. The time now is 01:56 PM.

Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.