Multi amp help
 

Hey All,

Well the Alero is in the shop getting brakes so it gives me a week or two to take another look at the system.

I am running 1 500/1000 for subs and one 45/150 for 4x6's...I will be ditching the Monsoon amp that runs the 6x9's in the not to distant future for a 150/300 amp. This brings up the hum maybe I should start looking at how I' am going to wire all 3 amps. I might as well get the block and stuff and have it wired in now with the 4x6 amp so it will be easy to add the last amp. Any thoughts?

I would recommend the KnuKonceptz KNF-60: http://www.knukonceptz.com/productDe...rodid=KNF-60x3. It's a 3-way distribution block, you get the fuses with it (make sure you know which sizes). I currently have one for 2 amps but that's because I use it for power and ground, with three amps you use it just for the power distribution. Then you can ground somewhere else.

Thanks I need an amp wiring kit for the new 4x6 amp maybe I can find a monster with a distribution block. I'll look around the crutch and frys.