I got my order in from LSDiodes.com recently, about 20 white 8000mcd LEDs and some resistors. I'm not going to do the 3rd brake light as originally planned for various reasons, and instead I'm replacing my interior stock yellowy lights with these beyond whiter than white leds.

I have a question tho, how do I get the near the feet stock lights out of their condoms?

you mean down near the hood release, and same spot on the pass side? they're 194's and just pull out.

sdgfgsfghdfhd

(edit)

yeap, they just pull out

Not the dome one's I'm having a hell of a time with. I've already shed blood trying to get one of them out. :blink:

Having some issues with the damn dome light. I placed 3 leds in series to replace the one 194 (i think) for facing the rear seat (did this for both 194s). I give power to the dome light (so all lights in it go on) and theres no voltage running through those back leds. When I connect a 9v bat to them with some alligator clips to the wires going to the them then they light up just fine, so I know its not the leds. When I power the dome light just the front 212-2 lights up (I plan on replacing w/ leds this later). Any ideas? This project has turned into a hassle but If i get it done right it should be worth it.

I am not using 194 replacements leds, this is a custom job.

(praying someone has a clue of what I'm talking about)

my rear 194's didnt come on with the dome light, only with the little switch on each side.

I thought I had them on, I'll have to check.

I wish someone who knew how to wire LED's lived around me, I have like 78 all intended for my interior, but yeah I am clueless on how to wire them.

Here's the diagram. Still not working, I'm guessing a problem behind the switches? Something ignorant I did?