Quote:
Originally posted by bigd6983@May 23 2004, 12:10 PM
next you will have to get it out, the whole thing kinda compacts making it easier to come out, just keep moving it around until it comes out and voila your done.
|
I nutsed around with getting the old regulator out for the longest time while replacing my driver's side regulator, then I found the key to making the install SO much easier. There's a small panel about 5" x 8" with 3 studs in it that connects the top of the inner door skin to the bottom, and this is also what the 2 screws are screwing into in behind your interior door handle. Just take the nuts off of this panel, and push in on it. It'll come right out. Once that panel's out of the way, the regulators will go in and out with ease. I took a pic after doing the install, showing the panel I'm referring-to for clarification. Hope this helps someone.
In the blown-up part in the bottom left, I circled the nuts needed to remove the small panel I spoke of above. Like I said, they aren't bolts, they're studs on the panel, so just push on the panel, and it'll come right out. Just don't lose the nuts. lol
**
No beer was harmed during the filming of this install** :new_all_coholic:
__________________
Yes it's modded, No it's not done, Yes it's fast, and no you can't drive it. **On a good day, my car has
two blowers.
Your car must be fast, you were haulin' ass when I passed you in my 4-door Buick.
