This is from that first article.
Quote:
|
Get some finishing resin, preferrably the stuff used to make surfboards, ultra high gloss. Paint it on to a perfectly smooth surface. This is key, any imperfections in the surface will be magnified by the fiberglass. Mix the fiberglass with a coloring agent, and use alot, to give a very opaque finish. Paint it on thick, and cover everything evenly. If you need to, do a second coat before the first coat loses it's stickyness. I suggest between 3-5 coats. On the final coat, thin the resin with acetone, this will help fill in some of the brush lines.
|
I want an opinion on this. I believe they want this done after its been bondoed/sanded, but I've never heard of this method before.