Aleromod.com - View Single Post

bdh1976 · 11-01-2006, 05:07 PM

Does anyone know what the resistance for the #1 plug wire, or what the resistance per foot should be?? I tested the wire and I'm getting 2.7k ohms.

I've got a 3.4L V6 and I keep getting a Cylinder #1 misfire code, I've replaced the spark plugs and wires this summer. But I replaced the spark plugs again this week with AC Delco Platinums and got the code again after driving about 50 miles. I think the coil is ok, the secondaries tested at 6.4K ohms (should be 5000 to 7000 ohms). I've listened to the injector and I can hear it click while the engine was running, and I had the injectors cleaned last week. This is starting to drive me crazy!

11-01-2006, 05:07 PM	#1
bdh1976 GX Member Join Date: Oct 2004 Posts: 16	Cylinder #1 misfire Does anyone know what the resistance for the #1 plug wire, or what the resistance per foot should be?? I tested the wire and I'm getting 2.7k ohms. I've got a 3.4L V6 and I keep getting a Cylinder #1 misfire code, I've replaced the spark plugs and wires this summer. But I replaced the spark plugs again this week with AC Delco Platinums and got the code again after driving about 50 miles. I think the coil is ok, the secondaries tested at 6.4K ohms (should be 5000 to 7000 ohms). I've listened to the injector and I can hear it click while the engine was running, and I had the injectors cleaned last week. This is starting to drive me crazy!