|
Try swapping out the coil pak.
Try this out, take out the plugs and see if it is wet. If plug is wet than most likely is not sparking. Even bad wires will spark if not cleanly.
For your info
Replace wire if resistance exceeds 600 ohms per feet.
Other unless details
-Plugs A/C Delco # 41-940; gap .060" OE # 25163148
-Wires OE # 12192345
-Injector resistance 11.4-12.6 ohms @ 50-95*F
-Lowest compression reading should bot be less than 70% of Highest compression reading. No compression reading should be less than 100psi (7.0kg/cm^2)
-Fuel pressure (KOEO) 48-55 psi
Last edited by super white alero1 : 11-01-2006 at 05:21 PM.
Reason: Im a dubass
|