Aleromod.com - View Single Post

DaRockwilder · 01-05-2007, 06:54 PM

Okay! I was back at this today, and I gained access to the horns, since I replaced the shitty headlight I had.

I could not get the horns to blast by jumping them. I didn't try at the connector on the horns though. I took that connector off and tried jumping the pins, with no luck. I grounded the bracket out and applied power to one side at a time and got nothing. I also grounded out one side of the horn and applied power to the other side. Nothing. Switched them around, still nothing.

Maybe I'm just not jumping it right.

I couldn't get power at the connector with a test light. What I was doing was hitting the panic button on my remote, and the horn is supposed to work then on its own. No power in the green wire in the connector.

The relay appears to be fine. I swapped it with different ones in the box and the other things (I think i used the one that flashed the headlights with the panic on) still work. I took the airbag out and everything looked okay in there. There is a connection deep in the steering wheel though. Is that the switch, or is the switch in the airbag module?

I also tried getting power at the relay with the panic on. I put the relay in part way so that it would make contact (couldn't get the voltmeter down in there) and I could only get .5 volts at three of the connections, and nothing at the other. With the panic on I did the same thing with the one that flashes the headlights and I got 12 volts whenever the lights came on at the same spot where the was no power on the horn relay. So I'm thinking I'm not getting power TO the relay?

Anyway, anything you guys can offer will help!
Thanks!

01-05-2007, 06:54 PM	#8
DaRockwilder GL Member Join Date: Nov 2006 Location: Winnipeg, MB Posts: 267	Okay! I was back at this today, and I gained access to the horns, since I replaced the shitty headlight I had. I could not get the horns to blast by jumping them. I didn't try at the connector on the horns though. I took that connector off and tried jumping the pins, with no luck. I grounded the bracket out and applied power to one side at a time and got nothing. I also grounded out one side of the horn and applied power to the other side. Nothing. Switched them around, still nothing. Maybe I'm just not jumping it right. I couldn't get power at the connector with a test light. What I was doing was hitting the panic button on my remote, and the horn is supposed to work then on its own. No power in the green wire in the connector. The relay appears to be fine. I swapped it with different ones in the box and the other things (I think i used the one that flashed the headlights with the panic on) still work. I took the airbag out and everything looked okay in there. There is a connection deep in the steering wheel though. Is that the switch, or is the switch in the airbag module? I also tried getting power at the relay with the panic on. I put the relay in part way so that it would make contact (couldn't get the voltmeter down in there) and I could only get .5 volts at three of the connections, and nothing at the other. With the panic on I did the same thing with the one that flashes the headlights and I got 12 volts whenever the lights came on at the same spot where the was no power on the horn relay. So I'm thinking I'm not getting power TO the relay? Anyway, anything you guys can offer will help! Thanks!