|
Ok. I just measured the resistance between the yellow wire (keyside and other side just to be sure) which is cut and the black wire which I only stripped the insulation. And I got the indication of an open resistor. I checked for voltage at all three points (both sides of the yellow wire and the black wire) and I go zero voltage. I dont know if that is normal or what. Im not sure but what if the bypass module (for the remote car starter) was installed and the people who installed it already cut the yellow wire upstream from where I cut the wire (by upstream, I mean more closer to the key side of the cut I made). I didnt see any evidence of them doing that but I dont know. Im still very desperate to get my car started with my key so that I can eventually drive it. Any help?
|