Aleromod.com - View Single Post

Satsuriku · 06-10-2007, 04:33 PM

you can just replace all the bulbs with LED's, doesnt have to be the 194's.

what i did was just take the original bulbs out, used LED's with resistors on them and soldered them on the "condom" and make sure the tips of the LED's were flat to difuse the light more evenly and make sure they are in the middle and not crooked or else the light will be un even.

do a little bit more searching and look through the How to section for the guide and it will tell you what to do step by step and with pics

06-10-2007, 04:33 PM	#2
Satsuriku V.I.P. Punching Bag Join Date: Jan 2006 Location: Lethbridge, Alberta Canada Posts: 4,313	you can just replace all the bulbs with LED's, doesnt have to be the 194's. what i did was just take the original bulbs out, used LED's with resistors on them and soldered them on the "condom" and make sure the tips of the LED's were flat to difuse the light more evenly and make sure they are in the middle and not crooked or else the light will be un even. do a little bit more searching and look through the How to section for the guide and it will tell you what to do step by step and with pics __________________ WARNING: The consumption of alcohol may create the illusion that you are tougher, smarter, faster and better looking than most people.