Aleromod.com - View Single Post

Eh_nigma · 07-27-2007, 10:38 PM

Alright, as mentioned, said camera now speaks with said laptop:

First picture is just the car while I was fishing the wire for the gauges through the frame - all the wires you see in this picture, gone! The are all hidden ever so nicely under panels: http://s171.photobucket.com/albums/u...t=DSC00778.jpg

The new wiring harness for the gauges: (Voltmeter, Volt. Selector, Oil Press, Oil Temp (still to be installed), Water Temp 1, Water Temp 2. Two leads on the end are for the ground and 12V Power. The connectors for the gauge inputs run into the A-Pillar and out of the way.: http://s171.photobucket.com/albums/u...t=DSC00784.jpg

And the Gauges - nothing new here really, except I'll have to get a picture tomorrow showing the new mounting brackets, and with the gauges in place (waiting for the Oil Temp though). The tilted toggle is the ignition, the one in the center is the Main Power, the other on the right side is Acc.: http://s171.photobucket.com/albums/u...t=DSC01305.jpg

All the wiring (can't see it, but there was over 400ft. of new wire added to the car, mostly in the dash), and the frame, as mentioned, cleaned/painted as much as I could.: http://s171.photobucket.com/albums/u...t=DSC01302.jpg

The dash all prepped and ready to be covered with the black leather:
http://s171.photobucket.com/albums/u...t=DSC00785.jpg

Finished floor panels on the driver side:
http://s171.photobucket.com/albums/u...t=DSC00783.jpg
http://s171.photobucket.com/albums/u...t=DSC00782.jpg

This is with the seat in, shows the fitment of the whole setup. There will be covers made but, once it's all covered in carpet, I'll do the caps then, so I can get the exact sizing done. You can also see the a good view into the panel that will hold the electrical connections for the rear. The two bundles are switches 4/5, the power will come in from the battery in the rear, and well... yeah... I'll show it once it's done.:
http://s171.photobucket.com/albums/u...t=DSC00787.jpg

And with the seat in position for where I'll be sitting while driving.:
http://s171.photobucket.com/albums/u...t=DSC00788.jpg

07-27-2007, 10:38 PM	#481
Eh_nigma the "Why Not?" Guy Join Date: Aug 2004 Location: CFB Shilo, Manitoba Posts: 1,217	Alright, as mentioned, said camera now speaks with said laptop: First picture is just the car while I was fishing the wire for the gauges through the frame - all the wires you see in this picture, gone! The are all hidden ever so nicely under panels: http://s171.photobucket.com/albums/u...t=DSC00778.jpg The new wiring harness for the gauges: (Voltmeter, Volt. Selector, Oil Press, Oil Temp (still to be installed), Water Temp 1, Water Temp 2. Two leads on the end are for the ground and 12V Power. The connectors for the gauge inputs run into the A-Pillar and out of the way.: http://s171.photobucket.com/albums/u...t=DSC00784.jpg And the Gauges - nothing new here really, except I'll have to get a picture tomorrow showing the new mounting brackets, and with the gauges in place (waiting for the Oil Temp though). The tilted toggle is the ignition, the one in the center is the Main Power, the other on the right side is Acc.: http://s171.photobucket.com/albums/u...t=DSC01305.jpg All the wiring (can't see it, but there was over 400ft. of new wire added to the car, mostly in the dash), and the frame, as mentioned, cleaned/painted as much as I could.: http://s171.photobucket.com/albums/u...t=DSC01302.jpg The dash all prepped and ready to be covered with the black leather: http://s171.photobucket.com/albums/u...t=DSC00785.jpg Finished floor panels on the driver side: http://s171.photobucket.com/albums/u...t=DSC00783.jpg http://s171.photobucket.com/albums/u...t=DSC00782.jpg This is with the seat in, shows the fitment of the whole setup. There will be covers made but, once it's all covered in carpet, I'll do the caps then, so I can get the exact sizing done. You can also see the a good view into the panel that will hold the electrical connections for the rear. The two bundles are switches 4/5, the power will come in from the battery in the rear, and well... yeah... I'll show it once it's done.: http://s171.photobucket.com/albums/u...t=DSC00787.jpg And with the seat in position for where I'll be sitting while driving.: http://s171.photobucket.com/albums/u...t=DSC00788.jpg __________________ "What are you doing to your car that's taking it so long?" -Everything "Why an Alero?" -Why the hell not?