Quote:
Originally Posted by superman88
cut a hole on the top and mount some computer fans on it that well move the heat out wire the positive to the rem and nigative to the ground for the fan wiring and that well solve the heating problem
|
DO NOT WIRE ACCESSORIES TO YOUR REMOTE LEADS.
Unless you dont care about frying your remote turn on lead. Then by all rights go ahead.
Remote turn on leads can only provide Milliamp currents. Thats less than 1 amp. SO putting things like fans on it causes it to draw to much current and either the internal fuse (IF THERE IS ONE) blows or your remote lead circuit fries.