|
thats no problem.... take the crap outta the cubby, long with the rubber insert.
There is a small staple on the front side of the shifter, take that out. The shifter will lift right off. then the plastic piece under the shifter will just pull right up. (from the base of the cubby, back to the cup holder behind the shifter) just pulls straight up. at that point, you should be able to reach just under the cubby, just grab the bottom of that cubby, and pull straight back, it'll all unclip.
just make sure to remove the wires, and remember where/how they were plugged in...
and your car is completely driveable w/o those two center pieces. you'll just have a little white nylon nub to push down in order to shift.
|