|
Yes the door panel fit over nicely because of the pocket in the door panel there was alot of room to spare for this install. the reason the crossover is in the door panel is because behind the speaker mount in the door the window glass is right there so limited space for the crossover.and lastly it is 3/4 mdf. Also what we had to do was make spacers so the panel is not directly on the door what we did was well now this is going to soung getto but took about 6 or 7 washers and glued them together and that gave us the space we needed for the speaker. The tweets that came with the components fit nicely into the old housing all it need was a little hot glue.
Now that should be all the info you will need to transform your factory 4x6 into a 6.5 and to the people that said it could not be done... :P
|