|
I'm not understanding....Is the switch going to the yellow wire or not, and did you cut the yellow wire before you saw the switch? If that switch is on the yellow wire and you did not cut it again, then you should be able to put the switch in the ON position and start the car. If you try to start the car with the switch in the off position then it will not turn over. You need to clarify what you did in order for us to help you more. Sorry for your luck dude, but you didn't see this switch until now?
...try this (hopefully you didn't cut the wire again, and if you did cut it again hopefully you reattached it) put the switch in the ON position and try and start the car with the key...of course if it doesn't start wait the 10 minutes and try to start again..once it is started turn the switch to the OFF position and turn the car off. Now try and start it with the remote start...if it is wired correctly it should start right up.
__________________
|