Quote:
Originally Posted by [ion] C2
Ya. _
|
so that is correct you just bolt on a closed flange as a "plug" ?
my other idea was cut back the downpipe (have to anyways) and put a 90 degree elbo from the stock DP hole and run that to the inlet and then run the downpipe from the turbo to the exhaust to the back,..... only problem with this idea is pipe clearance on the side... here is a rough diagram of tha idea.. although the "plug" the hole idea is probably how i will go.
bad very rough thought of possible manifold mod. probably not enough room for piping with this way but just a thought.