|
Heys guys I just finished changing the bearings on my dads 03 Alero. All I have to say is WTF!!, the 3 bolt that hold the hub is place are in such an akward spot that I almost stripped all 6 of them(Both Sides). Now I wanted to thank all of you who posted in here because without you guys I would of had no chance of even dreaming of doing this job. I would like to add my own thing if I could and that is to heat those three bolts until the locktight melts away so you dont strip out the bolts like I just did. Thats the only thing I see that has never been mentioned before so I thought I would let anyone else who is trying to replace theres doesnt end up grinding the bolts off. My plan was to write a precise way on replacing these but when I ran into this problem I put the camera away but I do have some pics I could share. Well I hope this helps out the next guy
|