Aleromod.com - View Single Post

jlong · 01-04-2010, 01:38 PM

So after replacing 2 worn tie rod ends I started thinking about replacing all the bushings.

I have a few questions.

How hard is it to remove and press in new control arm bushings?

How do I know what size front and rear sway bar are?

Is replacing the rear sway bar bushings and link bushings worth it?

And last what other bushings should be replaced on the rear? I can't locate any rear bushings on the oreilly or autozone site.

01-04-2010, 01:38 PM	#1
jlong GL Member Join Date: Sep 2006 Location: Katy, TX Posts: 241	Bushings So after replacing 2 worn tie rod ends I started thinking about replacing all the bushings. I have a few questions. How hard is it to remove and press in new control arm bushings? How do I know what size front and rear sway bar are? Is replacing the rear sway bar bushings and link bushings worth it? And last what other bushings should be replaced on the rear? I can't locate any rear bushings on the oreilly or autozone site.