Quote:
Originally Posted by cherrington17
ok... maybe its the wrong term... but the little screw valve on the front left of the valve cover. (as per last post... apparently its on top of the water pump.  )
...to the left of the oil cap. There is a little vertical black cylinder with a hexnut on top. With the car running, you use a small socket (7mm?) to open it, until coolant leaks out. At the beginning a bunch of air will come out, then bubbles, then just coolant. When its just coolant, tighten it back down, then shut the car off. |
we have a correct answer....7mm is right and also use a 10mm to hold the bottom part of the bleeder... this is a brass part so dont HEMAN this part....
