Aleromod.com - View Single Post

PappaSmurf · 04-07-2010, 12:53 AM

Redog,
Since you have helped me with gauges, let me tell you how I did mine. I have glowshift tinted 7 color LED gauges.
What I did is run a 14 gauge RED wire of the RED wire of the radio; Do the same EXACT thing with a YELLOW wire. Then run all of your grounds to the same contact (ONLY IF A VERY SOLID AND GOOD SPOT)! then all you have to do is run the sensor wires and plug into each individaul gauges and boom done.
Hope this helps.
-Smurf-

04-07-2010, 12:53 AM	#7
PappaSmurf GLS member Join Date: Apr 2009 Location: Nauvoo, AL Posts: 827	Redog, Since you have helped me with gauges, let me tell you how I did mine. I have glowshift tinted 7 color LED gauges. What I did is run a 14 gauge RED wire of the RED wire of the radio; Do the same EXACT thing with a YELLOW wire. Then run all of your grounds to the same contact (ONLY IF A VERY SOLID AND GOOD SPOT)! then all you have to do is run the sensor wires and plug into each individaul gauges and boom done. Hope this helps. -Smurf- __________________ "Check mate Bitch!"