Quote:
Originally Posted by guiguilandry
well thanks all for the compliments...
and here's the only build pic that I have...it really isn't tough at all to do...
I ordered a piece that has already 3 gauges holes from Z1 motorsport... (this piece is for a nissan 300zx to fill the centerspeaker hole in the console with gauges)
I trimmed my radiobezel and welded it with a soldering iron made for repairing bumper. I added some reinforcement in the back because the sides are now very thin.
Put some bondo made exactely for the plastics.. don't really remember the exact name but it is flexible ans made for the plastic. Shape and sand smooth starting by 40 up to 320 grain paper.
Filler primer sand 320 to 600 and finally 4 coats of trim black...
That way it look like it was factory made, because i'm not a fan of fiberglassed dash or painted dash....
|
OOOOOOOOOOO!!!!
Ha wow I thought that whole piece was like made of ONLY plastic, no filler or anything. The way you did it is real legit, much simpler than what I was trying to wrap my mind around
