View Single Post
Old 10-26-2010, 06:51 PM   #31
Cashdollar2009
GL Member
 
Cashdollar2009's Avatar
 
Join Date: Dec 2008
Location: Pennsylvania
Posts: 858
Cashdollar2009 is on a distinguished road
Quote:
Originally Posted by scott192 View Post
so im thinking about 38x15x24 and its 5.95cf before bracing but im thinking im gonna use 1" with a 4x15 port still doin more measuring and math ill be on in a bit to let u know what i come up with

If you are using 1" wood i'm coming up with a port length of 32 inches to achieve a 32Hz tuning. You're gonna have to make your port a bit skinnier in order to achieve the length to area ratio you want to get your tuning since 32 inches is gonna be impossible to get when the box is only 24 deep. Either way you are looking just over 4ft^3 after all displacement. This Torres calculator is about as good of a tool as you can get when building a box.



Edit: If you were to go with a port of 4H X 10W X 15L you will get 31.95Hz and 5.22ft^3 AFTER all displacement.
__________________
Under construction...

Last edited by Cashdollar2009 : 10-26-2010 at 06:54 PM.
Cashdollar2009 is offline   Reply With Quote