dayton is a long way from dc, but could possibly make a weekend trip in the spring. i am fairly certain a compression test was done after the motor was assembled in september 2006 and the results were normal. plugs are ac delco iridium 1 range colder than stock, gapped at .045. i have been tuning the pcm with dhp equipment. sprucegagt helped me out initially and i have had 2 experienced tuners tweak it over the years. i have had no trouble at all with the motor, it runs strong i just never got the results i wanted.
and i misspoke earlier, it did run a 14.9 twice. the middle slip has troubled me since it was handed to me after the run. i know i did not let off the throttle early, and the fact that it never went that fast again kinda backs that up.
