Aleromod.com - View Single Post

Redog · 02-05-2011, 02:33 AM

A 3/8 drive breaker bar works well. I have a short one, it only comes up to even with the alternator pulley.

I did buy a tool that everybody is taking about, took all of 3 seconds to put the belt back on after the water pump swap. Litterly 3 seconds

I carry a small toolbox in the car and a tool kit that I bought at Advance Auto. If I break down, I can fix the car on the spot. It's happened a few times. The worst was the #3 plug popping out, with my son in the car, on a holiday. Lucky I broke down and was able to limp to an auto parts store

02-05-2011, 02:33 AM	#17
Redog Aleromod part owner Join Date: Nov 2003 Location: Far Northeast Philadelphia, PA Posts: 18,199	A 3/8 drive breaker bar works well. I have a short one, it only comes up to even with the alternator pulley. I did buy a tool that everybody is taking about, took all of 3 seconds to put the belt back on after the water pump swap. Litterly 3 seconds I carry a small toolbox in the car and a tool kit that I bought at Advance Auto. If I break down, I can fix the car on the spot. It's happened a few times. The worst was the #3 plug popping out, with my son in the car, on a holiday. Lucky I broke down and was able to limp to an auto parts store __________________ *33% ALEROMOD OWNER!!* 2000 Olds Alero 3400 SFI 14.53 @ 94.93 1985 Olds Delta 88 307 SBO 17.96 @ 76.99 2007 Volvo V50 T5 6M 15.782 @ 89.12 www.facebook.com/kb0177 Last edited by Redog : 02-05-2011 at 02:39 AM.