Aleromod.com - View Single Post

Ttop191 · 02-17-2011, 03:03 PM

simple, go to your relay box, cut the wire coming from pin 87 (IIRC) on the DRL relay, then simply tap the power wire from your LED strips into that wire

Edit: just checked AllData, should be a dark blue wire coming off that pin that you need to tap into

Goodluck, can't wait to see the results

02-17-2011, 03:03 PM	#2
Ttop191 GLS member Join Date: Sep 2009 Location: Maui Posts: 1,797	simple, go to your relay box, cut the wire coming from pin 87 (IIRC) on the DRL relay, then simply tap the power wire from your LED strips into that wire Edit: just checked AllData, should be a dark blue wire coming off that pin that you need to tap into Goodluck, can't wait to see the results __________________ Last edited by Ttop191 : 02-17-2011 at 03:07 PM.