Quote:
Originally Posted by Philbar71
Im going to have to do the same cause the stock cooler lines are leaking badly at the metal to rubber crimp part.
Rouseman, how did you connect the aftermarket cooler to the trans? Did you unbolt the stock lines and get a fitting?
|
Yes the kit came with about 3 feet of new hose and lots of adapters as well as 3 different kinds of mounting hardware. The send hose was long enough but i had to add a little to the receive hose. I used a double female end piece to join the two, as well as small turn clamps and it hasent leaked a drop.
__________________
Mods so far: Custom cold air, flowmaster 80 series muffler, tinted tails and cleared corners w blacked out bezels, Grand am dual post mirrors, and trans cooler.
|