Aleromod.com - View Single Post

SIUlero · 09-09-2011, 12:29 AM

If your "Trac Off" light doesn't respond to your ETS button, there's something wrong with the light. It's either damaged, or has been taped over. The "Service Vehicle Soon" light should also have been on when the old hub was on there...if it's not, same story. You can confirm that they aren't working by watching to see if they come on when you first turn the key on. As for the ABS light (should be Amber, not red) and "Parking Brake Light" (Red Brake Warning light), if they were only on because of that sensor wire, and the hub was replaced correctly, they would not still be on now. It takes multiple cycles to clear the codes from memory, but not to cancel the lights. These lights default to "Off" at the beginning of every drive cycle.

You still need to have your codes scanned.

09-09-2011, 12:29 AM	#6
SIUlero GL Member Join Date: Apr 2007 Location: Olney, IL Posts: 306	If your "Trac Off" light doesn't respond to your ETS button, there's something wrong with the light. It's either damaged, or has been taped over. The "Service Vehicle Soon" light should also have been on when the old hub was on there...if it's not, same story. You can confirm that they aren't working by watching to see if they come on when you first turn the key on. As for the ABS light (should be Amber, not red) and "Parking Brake Light" (Red Brake Warning light), if they were only on because of that sensor wire, and the hub was replaced correctly, they would not still be on now. It takes multiple cycles to clear the codes from memory, but not to cancel the lights. These lights default to "Off" at the beginning of every drive cycle. You still need to have your codes scanned. __________________ '01 Alero GL '72 Cutlass Supreme http://www.cardomain.com/id/CrazyOldsGuy Last edited by SIUlero : 09-09-2011 at 12:43 AM.